topic Re: SSSU 6.x missing SHOW command in Storage Software

SSSU 6.x missing SHOW command

Cecilia Mazzuca_1 — Mon, 06 Nov 2006 12:14:20 GMT

Hello everybody!

I'm wondering why did HP took the SHOW command out of SSSU on its new version (6.x).

I could not find a command that shows the same information as easily as Show used to do.

I've found the LS command, but you have to LS down to the tree structure for each component to finally find information about them.

Does anyone know if there is a command to replace "show".. or any way to use LS to show information about ALL the items of a given category... (I've tried "ls disk_group all" "ls disk_group *", but it always ask for a name to show info).

Thanks a lot...

Cecilia

Re: SSSU 6.x missing SHOW command

Uwe Zessin — Mon, 06 Nov 2006 14:13:06 GMT

Does "ls disk_group full" give the information you want?

Re: SSSU 6.x missing SHOW command

Cecilia Mazzuca_1 — Mon, 06 Nov 2006 14:34:21 GMT

YES!!!! thanks a lot! i'm closing the thread...

Re: SSSU 6.x missing SHOW command

Cecilia Mazzuca_1 — Mon, 06 Nov 2006 14:35:30 GMT

closing