topic Re: SSSU SHOW command in Storage Software

SSSU SHOW command

Paul Whapshott — Tue, 18 Feb 2014 03:35:58 GMT

Hi,

I cannot show host or use any show command when using SSSU?

Can someone point out where I am going wrong!

NoSystemSelected> select system "EVA1"
EVA1> ?
The options are:
ADD
CAPTURE
CLEAR
CODELOAD
DELETE
EMVERSION
EXERCISE_DISK
EXIT
FILE
FIND
HELP
LOCATE
LS
MOVE
PAUSE
REDISCOVER
REFRESH
RESTART
SELECT
SET
SHUTDOWN
EVA1> show host
^
Error: Syntax error at or near here

P.S. This thread has been moved from Storage Area Networks (SAN) (Enterprise) to HP Storage System Scripting Utility (SSSU). -HP Forum Moderator

Re: SSSU SHOW command

Luk Vandenbussche — Fri, 24 Aug 2007 04:27:58 GMT

it is an option of LS
> LS ?

Re: SSSU SHOW command

Paul Whapshott — Fri, 24 Aug 2007 04:37:51 GMT

Ok Thanks Luk,

So LS is SHOW. Is this an error in the EVA Reference Guide ? which says SHOW HOST ?!

Regards,

Paul

Re: SSSU SHOW command

Luk Vandenbussche — Fri, 24 Aug 2007 04:48:33 GMT

Paul,

The syntax depends on the version of SSSU that you are using. And the SSSU version depends on the VCS version of your eva

Re: SSSU SHOW command

Uwe Zessin — Fri, 24 Aug 2007 05:46:15 GMT

The SHOW command came first. Then the LS command was added, with some additional features like XML output. In the lastest versions of SSSU, the SHOW command has been removed.

Re: SSSU SHOW command

Sheldon Smith — Mon, 27 Aug 2007 08:12:12 GMT

Sounds like you need the current SSSU Command Reference manual. Check here to download the one for your version of SSSU:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=12169&prodSeriesId=471497

Re: SSSU SHOW command

Tom O'Toole — Fri, 31 Aug 2007 12:32:50 GMT

Yes, they have been very cavalier about changing the commands and the output format of SSSU again and again, as different versions come out. This has been broken stuff I've written a few times. Unfortunately we don't have a spare SAN handy to test their new versions, so command view/EVA upgrades have been followed by a scramble to make sure critical functions work.

Re: SSSU SHOW command

Paul Whapshott — Mon, 03 Sep 2007 08:51:44 GMT

Thanks for the answer everyone. I will use the LS command and have now downloaded the latest manual for SSSU.

Regards,

Paul