topic Re: SAM Secure Shell in Operating System - HP-UX

SAM Secure Shell

Richard Ace — Thu, 16 Jan 2003 15:44:37 GMT

I have a little problem that I have not seen before with trying to use SAM on 11.0 HP/UX

I have checked the Tunneling box for X session.

I get

#sam

X connection to 128.30.1.62:10.0 broken (explicit kill or server shutdown).

?

Any Ideas

Cheers

Rich

Re: SAM Secure Shell

Richard Ace_1 — Wed, 25 Jun 2003 10:57:56 GMT

Re: SAM Secure Shell

Massimo Bianchi — Wed, 25 Jun 2003 11:07:51 GMT

Hi,
things to check:
- tunnelling box enalbed: means you are using putty ?
- is your Xserver on the PC started ? Try resetting it
- does and X-clock works ?
- is the IP your PC ? maybe another one took it by mistake. Is the ping O.K. ?
- do you use latest putty? it resolves many problems... latest is 0.53b
- did you run: "xhosts +" to allow connection to any client ?

HTH,
Massimo

Re: SAM Secure Shell

Richard Ace_1 — Wed, 25 Jun 2003 11:09:59 GMT

I have found that if you run the GUI software in Passive mode at the bare minimum, this aleaviate the problem and fires up the SAM GUI interface.

No need to export the DISPLAY Variable on this as tunneling is checked.

SAM Works

X connection to 128.30.1.62:10.0 broken (explicit kill or server shutdown).

Re: SAM Secure Shell

Richard Ace — Wed, 25 Jun 2003 11:15:43 GMT

SAM works now only running GUI in passive mode.

I am using SSH

GUI version is fine.

Cant get text based SAM? though.

Yes used X host?

Does ping

Cheers

Re: SAM Secure Shell

Pete Randall — Wed, 25 Jun 2003 11:21:49 GMT

Will the real Richard Ace please stand up?

;^)

Pete

Re: SAM Secure Shell

Massimo Bianchi — Wed, 25 Jun 2003 12:53:43 GMT

Hi,
to have the text-only sam, just type

export DISPLAY=

this will bring you to the Text User Interface (TUI).

Massimo