topic Re: Problem with boor process in Operating System - HP-UX

Problem with boor process

Fri, 17 Jan 2003 11:54:56 GMT

Server in boot process in PDC stop in manufacturing mode and then manually goes on.
Thanks for help

Re: Problem with boor process

Robert-Jan Goossens — Fri, 17 Jan 2003 11:58:15 GMT

Hi,

Could you give us a bit more info

HPUX version
server hardware
error messages

Kind regards,

Robert-jan.

Re: Problem with boor process

Eugeny Brychkov — Fri, 17 Jan 2003 11:58:25 GMT

Lubomir, call HP
Eugeny

Re: Problem with boor process

Fri, 17 Jan 2003 12:06:49 GMT

It is A500 there is no hardware problem only this one.

Re: Problem with boor process

Dietmar Konermann — Fri, 17 Jan 2003 12:38:22 GMT

The mfg mode is turned off in the gsp:

Use the system console (local or Secure Web console) and use Ctrl-B to enter the GSP mode.

At the GSP prompt:
gsp> qmm (quit manufacturing mode)
gsp> y (yes)
gsp> rs (reboot) ; System starts reboot.

To verify Interrupt the boot process At the BCH the MFG option should be removed.

See also:
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000064104017

Best regards...
Dietmar.