topic "dead" sessions in who's output in Operating System - HP-UX

"dead" sessions in who's output

Fedon Kadifeli — Thu, 28 Sep 2000 06:35:10 GMT

Our users use Reflection/X to connect to our HP-UX servers. I presume that from time to time, their PC's crash or are turned off without exiting normally from Reflection. In such cases their sessions become hung. I think that HP-UX has no default time-out mechanism to kill such interactive sessions. Most of the times I have to kill (with -9) the processes listed in "who -u" output. Even in this case (that is, when the processes are killed) the "who -u" output still displays these sessions.

For example, presently I know that there is no "itadmin" user in the system (I checked this with the "ps -fu itadmin" command, which displays nothing), but the "who -u" command displays something like:

# who -u | grep itadmin
itadmin pts/1 Sep 26 22:21 old 22904 10.16.67.183:0.0
itadmin pts/8 Sep 26 14:21 14:22 19565 haktur:0.0
itadmin pts/13 Sep 28 09:22 1:07 13301 seyalt
itadmin pts/14 Sep 28 09:22 1:07 13304 seyalt
itadmin pts/15 Sep 28 09:22 1:07 13303 seyalt
itadmin pts/29 Sep 25 15:24 old 18229 10.16.67.183:0.0
itadmin pts/30 Sep 25 15:24 old 18231 10.16.67.183:0.0
itadmin pts/32 Sep 25 15:24 1:10 18232 10.16.67.183:0.0
itadmin pts/35 Sep 25 15:24 old 18234 10.16.67.183:0.0

I know that this has to do with the wtmp file which is not updated correctly by the system. What can be the solution to this problem?

Re: "dead" sessions in who's output

Andreas Voss — Thu, 28 Sep 2000 06:57:57 GMT

Hi,

i had the same problem.
So i wrote a little c program (i called it utmpfix) that fixes the /etc/utmp file.
Put you at attachment.

Regards

Re: "dead" sessions in who's output

Marcel Eken_2 — Thu, 28 Sep 2000 07:04:00 GMT

Hi Fedon,

who gets its information from the /etc/utmp file. The file is
usually cleaned when a user logs out but in this case it became corrupt.

Follow these steps to remove the non existent sessions from the file :

1.check the last modification time of the /etc/utmp file

ls -l /etc/utmp

-rw-r--r-- 1 root root 1620 Jun 28 09:22 /etc/utmp

2.convert the binary /etc/utmp file to ascii :

/usr/sbin/acct/fwtmp /tmp/utmp.ascii

3.edit the /tmp/utmp.ascii file to remove the old entries

Note : the entries are sorted by date, simply use the login time reported by
who(1) to find the lines to remove.

4.convert the file back to binary format :

/usr/sbin/acct/fwtmp -ic /tmp/utmp.binary

5.verify that all unwanted entries have been removed from the new file :

who /tmp/utmp.binary

6.verify that the /etc/utmp file has not been modified since the
beginning of this procedure :

ls -l /etc/utmp

-rw-r--r-- 1 root root 1620 Jun 28 09:22 /etc/utmp

If the file has been updated do all the steps again.

7.replace the existing /etc/utmp file with the new one :

mv /tmp/utmp.binary /etc/utmp

8.verify that the file still has the same ownership and permissions :

ls -l /etc/utmp

-rw-r--r-- 1 root root 1600 Jun 28 09:30 /etc/utmp

The who(1) command will now report the correct information.