topic HP-UX Shell Scripts in Operating System - HP-UX

HP-UX Shell Scripts

harry_7 — Thu, 13 Feb 2003 09:59:31 GMT

Hi All,

Please help me to pass some unix sheel scripts.

I would like to monitor the daily disk space utilisation i.e. if it is more than 80% I will get alert via pager or email. ---- and other

System Utilities also (monitoring the Cluster, Tape drive is online before backup etc etc..

((( GET 10 Points ))) ((( as a Thanks )))

With Regards

Harry

Re: HP-UX Shell Scripts

Ian Dennison_1 — Thu, 13 Feb 2003 10:13:01 GMT

Look in this posting for 'filesys'.

Share and Enjoy! Ian

Re: HP-UX Shell Scripts

Ian Dennison_1 — Thu, 13 Feb 2003 10:24:00 GMT

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x026250011d20d6118ff40090279cd0f9,00.html

This posting.

Re: HP-UX Shell Scripts

Steve Steel — Thu, 13 Feb 2003 10:40:49 GMT

Hi

Script samples

http://www.introcomp.co.uk/hpux/index.html

http://forums.itrc.hp.com/cm/TopSolutions/1,,CA592260!1!answers,00.html

Hope it helps

steve Steel

Re: HP-UX Shell Scripts

Nick Wickens — Thu, 13 Feb 2003 11:50:16 GMT

Heres the one I use (Hacked from some contractor that was here some years back so I can't claim authorship - Hi Stefan :@) - Change the variables to fit.

LOW=75
HIGH=90
DATE=$(date)
OUTFILE=/tmp/bdfrep
:>$OUTFILE

(bdf |egrep -v '(cdrom|vg12temp)' |sed -e "1d"|sed -e "/^.*:.*$/d"|sed -e "/^[
] [ ]*.*$/d"|
while read LVOL SIZE USED AVAIL PERCENTAGE MOUNT_PT
do
BREAK=PAUSE
PERCENTAGE=$(echo $PERCENTAGE | sed -e "s/%//")

if [ $PERCENTAGE -ge $HIGH ]; then
echo " $DATE - WARNING - The percentage of used space on filesystem $MOU
NT_PT is greater than $HIGH percent"
echo "TO:sysadm
FROM:root@system.com
SUBJECT:Check Filesystem Space
$DATE - WARNING - The percentage of used space on filesystem $MOU
NT_PT is greater than $HIGH percent"|sendmail -t
elif [ $PERCENTAGE -ge $LOW ]; then
echo " $DATE - WARNING - The percentage of used space on filesystem $MO
UNT_PT is greater than $LOW percent"
fi
done
) >> $OUTFILE

Re: HP-UX Shell Scripts

harry d brown jr — Thu, 13 Feb 2003 13:10:17 GMT

I'd start here:

http://www.bb4.com/

live free or die
harry

Re: HP-UX Shell Scripts

Ricardo Bassoi — Thu, 13 Feb 2003 13:25:33 GMT

Hi Harry,

Here follows a script that I did in order to check the file system.

Regards,

Ricardo

Re: HP-UX Shell Scripts

Rainer von Bongartz — Thu, 13 Feb 2003 13:26:05 GMT

Harry,

The most elegant way to do this is using HP's event monitoring services.

If not already installed download it from

ftp://software.hp.com/dist/swdepot/downloads/3596858471/B7609BA_11.11.depot

Configure it from SAM; its very easy a reliable.

Regards
Rainer

Re: HP-UX Shell Scripts

Marco Santerre — Thu, 13 Feb 2003 13:36:35 GMT

I was just wondering if you are building these scripts cause you have no tools for monitoring?

Here we are using OVO (IT/O, VPO, or however you wanna call it) for all that stuff. Basically, it does all of that monitoring for us. I'm sure there is a cost associated to it, and was wondering if that's the reason you are looking for scripts. Cause if cost is not an issue, I would suggest to talk to HP about OVO.