https://community.hpe.com/t5/operating-system-hp-ux/install-networking-ace-on-server/m-p/2425352#M1081 Hi, <BR /><BR />try to load the patch PHNE_21108 <BR />thats the NFS Kernel General Rel &amp; Perf Patch which includes NFS V3 <BR />After installation you have to edit the /etc/rc.confid.d/nfsconf where there are new variables which controlls the NFS behavior: <BR />MOUNTD_VER=(2|3) <BR />also you can enable the new automount feature with: <BR />AUTOFS=1 <BR /><BR />If you don't see these new variables take a look at /usr/newconfig/etc/rc.config.d/nfsconf <BR /><BR />Greetings <BR /><BR />Andrew Thu, 08 Jun 2000 07:46:38 GMT Andreas Voss 2000-06-08T07:46:38Z https://community.hpe.com/t5/operating-system-hp-ux/install-networking-ace-on-server/m-p/2425351#M1080 i have some 10.20 servers still running nfs v2.<BR />i'd like to upgrade them to nfs v3.<BR />can i install the december 1999 networking ace bundle on servers<BR />or is it just for workstations?<BR />otherwise, what do i need to install to upgrade these systems?<BR /><BR />thanks. Wed, 07 Jun 2000 22:04:35 GMT https://community.hpe.com/t5/operating-system-hp-ux/install-networking-ace-on-server/m-p/2425351#M1080 Allyn Fratkin 2000-06-07T22:04:35Z https://community.hpe.com/t5/operating-system-hp-ux/install-networking-ace-on-server/m-p/2425352#M1081 Hi, <BR /><BR />try to load the patch PHNE_21108 <BR />thats the NFS Kernel General Rel &amp; Perf Patch which includes NFS V3 <BR />After installation you have to edit the /etc/rc.confid.d/nfsconf where there are new variables which controlls the NFS behavior: <BR />MOUNTD_VER=(2|3) <BR />also you can enable the new automount feature with: <BR />AUTOFS=1 <BR /><BR />If you don't see these new variables take a look at /usr/newconfig/etc/rc.config.d/nfsconf <BR /><BR />Greetings <BR /><BR />Andrew Thu, 08 Jun 2000 07:46:38 GMT https://community.hpe.com/t5/operating-system-hp-ux/install-networking-ace-on-server/m-p/2425352#M1081 Andreas Voss 2000-06-08T07:46:38Z