topic Upgrade from HPUX 10 to 11 in Operating System - HP-UX

Upgrade from HPUX 10 to 11

senthil_3 — Mon, 03 Mar 2003 11:21:16 GMT

Hi all,
I Have a server G-30 Model Which is running under HPUX 10.01 I want to upgrade it to 11.0. The G-30 doen't have a cdrom and the 11.0 OS media type is cdrom. I hv many other server hp servers.
Is network upgradation possible ??
How should I proceed further?
Please help me.

Thanks
Senthil

Re: Upgrade from HPUX 10 to 11

Khalid A. Al-Tayaran — Mon, 03 Mar 2003 11:30:38 GMT

Hi,,

Setup an Ignite server and let your G-30 boot through lan. Add the G-30 to the Ignite server as a client.

Re: Upgrade from HPUX 10 to 11

KapilRaj — Mon, 03 Mar 2003 11:50:55 GMT

Steps,

1. Find out whether G-30 supports 11.0 or not if [ $? -ne 0 ]
then
exit 127
fi
2. Install ignite server on one of the node and install G-30 from it

kaps

Re: Upgrade from HPUX 10 to 11

Ravi_8 — Mon, 03 Mar 2003 11:59:58 GMT

Hi

i don't think G-30 would support 11x

Re: Upgrade from HPUX 10 to 11

Ravi_8 — Mon, 03 Mar 2003 12:00:23 GMT

Hi

i don't think G-30 would support 11x,

if so ignite is the way to install

Re: Upgrade from HPUX 10 to 11

Pete Randall — Mon, 03 Mar 2003 12:02:43 GMT

The G-30 will support 11.0 in 32 bit mode:

http://devrsrc1.external.hp.com/STK/serversupport.html

And yes, Ignite's make_net_recovery would be the way to accomplish this.

Pete

Re: Upgrade from HPUX 10 to 11

Ravi_8 — Mon, 03 Mar 2003 12:10:04 GMT

pete, thanx for the info

Re: Upgrade from HPUX 10 to 11

Michael Steele_2 — Mon, 03 Mar 2003 12:21:04 GMT

I've always prefered cloning from a make_tape_recovery tape. If you have a tape drive then go this way. Portable tape drives and CDROMs atttached to your G30 for example. Only catch with this is, you'll need another G-class server. Here is an URL listing supported classes and it seems to infer that you can clone from another (E,F,G,H or I) servers, but I doubt this:

http://devrsrc1.external.hp.com/STK/serversupport.html

Building a Ingite network installation server is a lot of work and you may not have a NIC card or some other network component that supports network installs. You'll have to investigate this. Here is an URL for building one though:

http://docs.hp.com/hpux/onlinedocs/B2355-90767/B2355-90767.html

Your G30 only supports a 30 bit version of HP-UX 11.00. Refer to the URL listed below:

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B3782-90807/B3782-90807_top.html&con=/hpux/onlinedocs/B3782-90807/00/00/10-con.html&toc=/hpux/onlinedocs/B3782-90807/00/00/10-toc.html&searchterms=supported%7cservers%7c11.00&queryid=20030303-050703