topic swpackage in Operating System - HP-UX

swpackage

Cleymans Edwin — Mon, 03 Mar 2003 14:54:26 GMT

Hi folks,
In order to customize +/-100 HP-UX workstations and +/- 10 HP-UX servers,I intend to set up a SD-UX depot structure with SD-UX (swpackage). This will simplify the customization of a system to a simple "swinstall" and a later verify on the customization to a simple "swverify".
Most of the stuff is extra symbolic links, and the classic /etc - files.
Any tips and tricks ?
Edwin

Re: swpackage

Sridhar Bhaskarla — Mon, 03 Mar 2003 14:58:26 GMT

Hi,

Creating a depot from a psf file is not too difficult. There are quite a number of parameters that you need to get familiar with in order to take full advantage of the swpackage commands.

man swpackage - how to use swpackage
man 5 swpackage - psf file format (important)

Once you understand how to create psf file after going through the second man page, it is a matter of running swpackage on the psf file.

Look at the section 'creating swpackage' in the following manual

http://docs.hp.com/hpux/onlinedocs/B2355-90154/B2355-90154.html

-Sri

Re: swpackage

S.K. Chan — Mon, 03 Mar 2003 15:02:23 GMT

It's more of how you to configure your psf file than anything. Take a look at this doc for more details.
http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B1996-90011/B1996-90011_top.html&con=/hpux/onlinedocs/B1996-90011/00/00/95-con.html&toc=/hpux/onlinedocs/B1996-90011/00/00/95-toc.html&searchterms=SD&queryid=20010505-021209
Hope it helps..