https://community.hpe.com/t5/operating-system-hp-ux/dtc16tn-printer-problem/m-p/2925611#M110540 If timeout issues are a problem alter the "telnet_timer:" in the pcf_xxxx file under /etc/ddfa to a larger number. I have mine set at 700. <BR /><BR />Also, a common problem with serial printers is to be sure XON/XOFF handshaking is enabled on both the port and the printer. <BR /><BR /> Wed, 12 Mar 2003 19:56:10 GMT Paul Sperry 2003-03-12T19:56:10Z https://community.hpe.com/t5/operating-system-hp-ux/dtc16tn-printer-problem/m-p/2925610#M110539 I have a printer connected to a dtc16TN that is having a problem completing some print jobs. While the cause might be a bad wire in a cable, I would like to know if anyone could explain the syslog entries for the dtc port that the printer is connected to. The printer's OCD's PID is 5056.<BR />Thanks in advance.<BR />Heres the most recent syslog entry for the OCD:<BR />Mar 12 11:13:09 fki ocd[5056]: (200) ERROR: Unable to obtain data from network:<BR />system error 232: Connection reset by peer<BR />Mar 12 11:13:09 fki ocd[5056]: (270) ERROR: System returned error 256 while disa<BR />bling printer: system error 0<BR />Mar 12 11:13:09 fki ocd[5056]: (299) ERROR: Closing connection due to error with<BR /> data path<BR />Mar 12 11:13:09 fki ocd[5056]: (297) ERROR: Removing pseudonym /dev/telnet/d1703<BR /> and closing pty /dev/ptym/ptywe<BR />Mar 12 11:13:09 fki ocd[5056]: (296) ERROR: Recreating pseudonym /dev/telnet/d17<BR />03 with new pty<BR />Mar 12 11:14:19 fki ocd[5056]: (200) ERROR: Unable to obtain data from network:<BR />system error 232: Connection reset by peer<BR />Mar 12 11:14:19 fki ocd[5056]: (270) ERROR: System returned error 256 while disa<BR />bling printer: system error 0<BR />Mar 12 11:14:19 fki ocd[5056]: (299) ERROR: Closing connection due to error with<BR /> data path<BR />Mar 12 11:14:19 fki ocd[5056]: (297) ERROR: Removing pseudonym /dev/telnet/d1703<BR /> and closing pty /dev/ptym/ptyo2<BR />Mar 12 11:14:19 fki ocd[5056]: (296) ERROR: Recreating pseudonym /dev/telnet/d17<BR />03 with new pty<BR /> Wed, 12 Mar 2003 19:30:21 GMT https://community.hpe.com/t5/operating-system-hp-ux/dtc16tn-printer-problem/m-p/2925610#M110539 Brad Marks 2003-03-12T19:30:21Z https://community.hpe.com/t5/operating-system-hp-ux/dtc16tn-printer-problem/m-p/2925611#M110540 If timeout issues are a problem alter the "telnet_timer:" in the pcf_xxxx file under /etc/ddfa to a larger number. I have mine set at 700. <BR /><BR />Also, a common problem with serial printers is to be sure XON/XOFF handshaking is enabled on both the port and the printer. <BR /><BR /> Wed, 12 Mar 2003 19:56:10 GMT https://community.hpe.com/t5/operating-system-hp-ux/dtc16tn-printer-problem/m-p/2925611#M110540 Paul Sperry 2003-03-12T19:56:10Z