topic Re: pv command in Operating System - HP-UX

pv command

Hanry Zhou — Wed, 26 Mar 2003 21:32:42 GMT

where can I find the detail usage on pv command? and configurations related pv?

Thanks,

Re: pv command

Jeff Schussele — Wed, 26 Mar 2003 21:36:40 GMT

Hi Roger,

I assume you mean the pv commands dealing with Physical Volumes

pvchange
pvck
pvcreate
pvdisplay
pvmove
pvremove

all have their own man pages.

Also see the online LVM manual

http://us-support3.external.hp.com/iv/data/documents/DE_SW_UX_swrec_EN_01_E/LVM.pdf

Rgds,
Jeff

Re: pv command

James R. Ferguson — Wed, 26 Mar 2003 21:37:16 GMT

Hi:

'pv' what? There are several commands the begin with 'pv'. Do:

# man -k pv

...to expose them...

Regards!

...JRF...

Re: pv command

S.K. Chan — Wed, 26 Mar 2003 21:39:48 GMT

LVM pv's command ?
You can check the man pages ..
$ man pvchange
$ man pvcreate
$ man pvdisplay
$ man pvmove
$ man pvremove
Not sure if there are more ..

Re: pv command

Stuart Abramson_2 — Wed, 26 Mar 2003 21:40:12 GMT

I have attached notes which is everything I know about measureware and perfview.

Stuart

Re: pv command

Sridhar Bhaskarla — Wed, 26 Mar 2003 21:41:25 GMT

Hi Roger,

If you are trying to find help on Perfview's pv command, then there are PDF files under /opt/perf/paperdocs directory.

See if they can help you.

-Sri

Re: pv command

Hanry Zhou — Wed, 26 Mar 2003 21:50:51 GMT

Sri,

I am looking for perf pv command, and the documemt on the web site?

Thanks,

Re: pv command

Sridhar Bhaskarla — Wed, 26 Mar 2003 21:59:12 GMT

I don't know if HP provides Perview documentation on web but I would install the trail version of Glance to grab the documentation under /opt/perf/paperdocs.

-Sri

Re: pv command

Michael Steele_2 — Thu, 27 Mar 2003 03:18:47 GMT

In general:

pv -batch -dest path_to_file -b begin_date -ymax 100 -graph

For ASCII files:

#extract -xp -G -b >START_DATE> -e -r /var/opt/perf/reptall -f

All of this is a part of MeasureWare. Within MeasureWare there are five files used to collect different heuristics:

logglob (* global metrics *)
logdev (* disk/device *)
logappl (* application *)
logtran (* transactions *)
logproc (* process log *)

Obtain a copy of the MeasureWare dictionary and note the 250 plus variables within these log files that can be turned on and used to collect data.

Don't forget to award points cuz its all about the points. Just use the drop down menu on each replay and select a number.

Re: pv command

Hanry Zhou — Thu, 27 Mar 2003 14:31:05 GMT

Anybody else, where can I find docs about detail pv usage(perfview).

Points will be assigned later.

Thanks,
roger

Re: pv command

Hanry Zhou — Thu, 27 Mar 2003 14:31:17 GMT

Anybody else, where can I find docs on hp web site about detail pv usage(perfview).

Points will be assigned later.

Thanks,
roger

Re: pv command

James R. Ferguson — Thu, 27 Mar 2003 14:44:33 GMT

Hi (again) Roger:

Follow the link (below) to the whitepapers and do a keyword search for 'perfview'. Good luck.

http://www.ntp.org/index.html

Regards!

...JRF...

Re: pv command

Hanry Zhou — Thu, 27 Mar 2003 14:47:55 GMT

James,

Are you sure the link, because it seems a NTP site. I could find any thing about perfview?

Roger

Re: pv command

IT Response — Thu, 27 Mar 2003 14:49:46 GMT

This member has assigned points to 64 of 179 responses to his/her questions.

Re: pv command

S.K. Chan — Thu, 27 Mar 2003 14:54:54 GMT

You can try HP's openview site..at www.openview.hp.com I think once you've install the glancepak plus you would be abe to get the man pages for it. This may be something of interest..
http://www.openview.hp.com/products/operations/tech_whitepaper/ovops_twp2.pdf