topic Re: Boot Information in Operating System - HP-UX

Boot Information

Filosofo — Thu, 17 Apr 2003 14:43:19 GMT

Hello,
I have ISL> prompt.
What are the command that I execute to continue the boot proces?

Filo

Re: Boot Information

Pete Randall — Thu, 17 Apr 2003 14:44:52 GMT

hpux

Pete

Re: Boot Information

Michael Steele_2 — Thu, 17 Apr 2003 14:45:26 GMT

ISL>hpux

-or-

ISL>hpux /stand/vmunix

Re: Boot Information

Patrick Wallek — Thu, 17 Apr 2003 14:45:34 GMT

You can try either:

ISL> bo pri

or

ISL> hpux

Re: Boot Information

Jeff Schussele — Thu, 17 Apr 2003 14:47:25 GMT

Hi Filo,

As Pete stated
hpux

But if you have a mirrored boot/root disk set & one is bad you'd need
hpux -lq

If you want single user mode
hpux -is

If you want LVM maint mode
hpux -lm

HTH,
Jeff

Re: Boot Information

Helen French — Thu, 17 Apr 2003 14:48:25 GMT

For normal boot:

ISL > hpux

If you want to boot in single user mode, give 'hpux -is'. Also type "help" for available commands and it's usage.

Re: Boot Information

Zafar A. Mohammed_1 — Thu, 17 Apr 2003 21:58:43 GMT

all the above commands are correct and if you need more then check this link chapter#5 Section Booting Systems.

http://docs.hp.com/hpux/pdf/B2355-90742.pdf

Thanks
Zafar

Re: Boot Information

Pete Randall — Thu, 17 Apr 2003 22:09:09 GMT

See, that's why Jeff's answer is better than mine. I went for the short and sweet, Jeff is comprehensive and informative!

;^)

Pete