https://community.hpe.com/t5/operating-system-hp-ux/increasing-memory/m-p/2421347#M117 As long as you loaded the memory into the right slots (check HP documentation), <BR />the memory will work just fine. If you run dmesg right after boot time, or <BR />look at the top of /var/adm/syslog/syslog.log to see how much memory the system <BR />thinks it has.<BR /><BR />One thing you'll want to do is verify that you have enough swap space - it's <BR />recommended to use at least 2 times the amount of physical memory on the system <BR />(320Mb for your system)<BR /><BR />-Evan Wed, 12 Apr 2000 08:16:57 GMT Evan Day_1 2000-04-12T08:16:57Z https://community.hpe.com/t5/operating-system-hp-ux/increasing-memory/m-p/2421346#M116 I recently bought a new memory board to increase my computers memory. I just <BR />installed it but afterwards starting questioning myself as to if there was <BR />anything special that I needed to do before installing it? I had a 32mb <BR />already in it and added a 128 mb to make it a total of 160mb. Wed, 12 Apr 2000 07:07:15 GMT https://community.hpe.com/t5/operating-system-hp-ux/increasing-memory/m-p/2421346#M116 April Bernard 2000-04-12T07:07:15Z https://community.hpe.com/t5/operating-system-hp-ux/increasing-memory/m-p/2421347#M117 As long as you loaded the memory into the right slots (check HP documentation), <BR />the memory will work just fine. If you run dmesg right after boot time, or <BR />look at the top of /var/adm/syslog/syslog.log to see how much memory the system <BR />thinks it has.<BR /><BR />One thing you'll want to do is verify that you have enough swap space - it's <BR />recommended to use at least 2 times the amount of physical memory on the system <BR />(320Mb for your system)<BR /><BR />-Evan Wed, 12 Apr 2000 08:16:57 GMT https://community.hpe.com/t5/operating-system-hp-ux/increasing-memory/m-p/2421347#M117 Evan Day_1 2000-04-12T08:16:57Z