topic Re: NIS problem on Slave server. in Operating System - HP-UX

NIS problem on Slave server.

Jatinder Cheema — Thu, 01 May 2003 13:54:49 GMT

Hi,

Strange one, I can create a new user on the master, push the files out to slave and clients. On the clients I am able to su to the users account. However on the slave i am unable, the error is stating user id unknown. However when you run a ypcat passwd on the slave you can see the user has an entry. The home dir is created on the slave however the uid(numerical) is shown instead of the users name. The slave is not using a nsswitch.conf file and nslookup uses the master server to search hosts successfully.

Any ideas/pointer?

All slave proccesses are running and existing users can log in.

Thanks

Jat

Re: NIS problem on Slave server.

Robert-Jan Goossens — Thu, 01 May 2003 14:08:04 GMT

Hi Jat,

Take a look at this question.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x329719434a69d711abdc0090277a778c,00.html

Robert-Jan.

Re: NIS problem on Slave server.

Zeev Schultz — Thu, 01 May 2003 14:10:28 GMT

When you run ypcat on the slave are you bound
to the slave itself or another slave/master?
It can be that passwd map wasn't propagated yet
to the slave you're bound to or in-the-middle of update.It can also be that your clients are
bound to different slave or to master itself.
Another point - what do you mean slave isn't
using nsswitch.conf?For lookups to use master,should be "passwd: nis ...".And any user
behaviour on slave (lookups etc) is up to NIS
CLIENT configuration on the slave IMHO.

Regards

Zeev

Re: NIS problem on Slave server.

Jatinder Cheema — Thu, 01 May 2003 14:49:12 GMT

Hi All,

Sorry its solved, what had happened was that the masters config was copied over, /etc/passwd/ was infact for the master server, it was missing the +::0:0::: string at the end of the file. So it was infact looking at the local passwd file only.

Thanks for all the speedy help.

Jat