topic Re: CPU speed in Operating System - HP-UX

CPU speed

Christian Aguilar Varga — Fri, 09 May 2003 15:59:55 GMT

Hi!
I have E-35 and E-25 servers with UNIX HP-UX 9.04.
What's the command to get the CPU speed in this version of unix?

Re: CPU speed

John Meissner — Fri, 09 May 2003 16:01:52 GMT

not sure about that version... but for 10.2, 11.0, 11.11 I use this:

echo itick_per_tick/D | adb /stand/vmunix /dev/kmem

Re: CPU speed

Helen French — Fri, 09 May 2003 16:09:11 GMT

Try from SAM and check the system properties (under performance monitors?)

Also, if you can interrupt the boot process and get to the boot console menu, check the available options there to see the system information.

Re: CPU speed

Pete Randall — Fri, 09 May 2003 16:24:15 GMT

Christian,

No need for a command, I can tell you: It's S.L.O.W.

The E25 is 48 MHz and the E35 is 64 MHz.

Pete

Re: CPU speed

Geoff Wild — Fri, 09 May 2003 16:35:41 GMT

Not too sure if this script will run...but you could try......

Called hpmem...

Rgds...Geoff

Re: CPU speed

Bruce Troutman — Fri, 09 May 2003 16:55:48 GMT

geoff, I just did on an E25 and it worked fine. I would assign you some points if I could :)

Re: CPU speed

Rick Connelly_2 — Fri, 09 May 2003 19:09:31 GMT

Geoff, that is a cool script,
thanks for posting it

Re: CPU speed

SM_3 — Sat, 10 May 2003 14:46:28 GMT

Christian

what do you use the E servers for?

just curiosity.....

Re: CPU speed

Geoff Wild — Mon, 12 May 2003 20:00:03 GMT

Rick - np.

Bruce - glad it worked...you can easily add more to it...

Christian, please check out:

http://66.34.90.71/ITRCForumsEtiquette/index.html

CA775399
ITRC member since: April 11, 2002
last contribution date: May 12, 2003
This member has assigned points to 6 of 68 responses to his/her questions.

:)