topic Re: Is there a command line method to obtain kernel parameters? in Operating System - HP-UX

Is there a command line method to obtain kernel parameters?

Russ Park — Fri, 23 May 2003 18:12:44 GMT

Here's an email from a user, we are a mostly Tru64 shop, but have a new rp5430 running 11i:

Russ,
The Oracle install guide requests the following HP-UX kernel parameter settings. In TRU64 I can use the "/sbin/sysconfig -q ipc" command to check the existing settings. Doesn't work for HP-UX. Can you check these parameters and update if necessary?

Shared Memory
SHMMAX 1 GB
SHMMIN 1
SHMMNI 100
SHMSEG 10

Semaphores
SEMMNI 70
SEMMNS 200

Threads
MAX_THREAD_PROC 256

Re: Is there a command line method to obtain kernel parameters?

Helen French — Fri, 23 May 2003 18:14:13 GMT

The command is this:

# kmtune

Re: Is there a command line method to obtain kernel parameters?

Dario_1 — Fri, 23 May 2003 18:16:22 GMT

Hi!

The command is kmtune

Regards,

DR

Re: Is there a command line method to obtain kernel parameters?

Uday_S_Ankolekar — Fri, 23 May 2003 18:16:38 GMT

use command kmtune -l

-USA..

Re: Is there a command line method to obtain kernel parameters?

Hai Nguyen_1 — Fri, 23 May 2003 18:16:43 GMT

To have more details, run:
# kmtune -l

Hai

Re: Is there a command line method to obtain kernel parameters?

Helen French — Fri, 23 May 2003 18:17:25 GMT

To add, unlike other flavors, HP-UX doesn't have a kernel parameter called "SHMMIN" as specified by Oracle. So, do not waste your time looking for that parameter.

Re: Is there a command line method to obtain kernel parameters?

A. Clay Stephenson — Fri, 23 May 2003 18:17:28 GMT

kmtune or the more archaic sysdef.

Re: Is there a command line method to obtain kernel parameters?

Russ Park — Fri, 23 May 2003 18:37:06 GMT

Thanks to all for the quick responses, I got what I needed!

BTW, I'm not sure what to do about assigning points when I get 6 of the same answer, do I give freely to all, or just the 1st one that got it?

Re: Is there a command line method to obtain kernel parameters?

Dario_1 — Fri, 23 May 2003 19:13:38 GMT

Hi Russell!

I hate to be the one answering that question, I will like to answer a technical one instead of this one but I have seen so many 10 points on answers that did not resolve the problem. My point here is that you can assign as many points as you want but it is very nice to assign points to every answer. You are the judge, you will have to make the decision on how to proceed. You asked a question and got 6 GOOD answers that helped you to resolve your problem. That's one of the reasons why we are here, to help others.

Regards,
DR

Re: Is there a command line method to obtain kernel parameters?

H.Merijn Brand (procura — Fri, 23 May 2003 19:25:42 GMT

Attached kmtune.pl is a wrapper that shows not only the parameter and it's value, but also the value in hex, the formula, and the default value of the parameter. pass a part of the name of the parameter you want to examine and it'll show only the matching one's

a5:/u/usr/merijn 102 > kmtune.pl maxd
Parameter Value hex Value dec Function Default
-------------------- ------------ ----------- --------------------------- --------------------
maxdsiz 0x0010000000 268435456 0x10000000 0x04000000
maxdsiz_64bit 0x0040000000 1073741824 0x0000000040000000
a5:/u/usr/merijn 103 >

Enjoy, have FUN! H.Merijn

Re: Is there a command line method to obtain kernel parameters?

Jarle Bjorgeengen — Mon, 26 May 2003 07:51:35 GMT

Maybe the answerer should consider NOT answering exactyy the same as someone earlier did just to get points ?

Rgs Jarle

Re: Is there a command line method to obtain kernel parameters?

H.Merijn Brand (procura — Mon, 26 May 2003 08:19:20 GMT

Jarle, did you look at the posting times? They were all answered within 2 minutes. Most likely none of the above ever could see the other answers before hitting the submit button.

My answer added some value, at least IMHO by adding a script that *uses* the correct answer to be even more usable.

I agree with you that people should read before answering, but in this case nobody has done anything wrong. It only shows how many people have knowledge in this forum.

No points please

Enjoy, have FUN! H.Merijn

Re: Is there a command line method to obtain kernel parameters?

Massimo Bianchi — Mon, 26 May 2003 08:49:58 GMT

Hi,
i know i'm the last, but there is also the *orrid* SAM in text-only format.

In the kernel subsection, tunable parameter, you have:
- standard value
- computed formulas
- description.

If you are not very familiar with hpux it can be helpful.

to start SAM, just digit
sam
at the promt.

HTH,
Massimo