topic Re: Software Admin Question in Operating System - HP-UX

Software Admin Question

Alzhy — Tue, 10 Jun 2003 12:34:43 GMT

A little help please:

1. When upgrading software in HPUX, do I need to remove first the existing version? (ie. Upgrading CIFS/Server A.01.08 to A.01.09). What happens if I remove A.01.09 if I installed it on top of A.01.08? Will A.01.08 get reinstated?

2. Also, how do I remove a software fileset? Ie. CIFS (client and software) were included in an OS 11i install... swlist does not show them but swlist -l fileset does.

3. Any short but comprehensive software administration link/site I could be pointed to?

Re: Software Admin Question

Patrick Wallek — Tue, 10 Jun 2003 12:43:55 GMT

1) It entirely depends on the software. Some things get installed to a different location, so there is no point in removing the old first. Some software, like Ignite/UX, I always remove the old first and then install the new.

2) You remove a fileset using 'swremove'. If you just do an:

# swremove

Then a window will open up and give you a selection of software that is installed on your system. You select what you want to remove from this list, mark it, and remove it.

3) You could check http://docs.hp.com and see if they have anything that suits you.

Re: Software Admin Question

Zeev Schultz — Tue, 10 Jun 2003 12:44:58 GMT

1)depends,usually worth to read release notes
can find them on docs.hp.com,search for CIFS.
I usually did swremove as it didn't take much time.Oh,well saved smbd.conf and needed files (logs?)
2)swremove,sometimes filesets depend one on another but in case of CIFS 9000 software I think it's a standalone install (no dep.)
2) www.software.hp.com , hpux.utah.cs.edu

Zeev

Re: Software Admin Question

Darren Prior — Tue, 10 Jun 2003 12:49:42 GMT

Hi Nelson,

1) It depends on the s/w; CIFS can be upgraded without uninstalling the previous version. Doing this will preserve your existing CIFS configuration.

3) http://docs.hp.com

Please also consider awarding points to those that have helped you - it helps others decide which answers are good and is a free way of rewarding those that have spent their time helping you.

regards,

Darren.

Re: Software Admin Question

Robert-Jan Goossens — Tue, 10 Jun 2003 12:56:23 GMT

Hi,

Adding a bit of information before starting swremove.

If you use X-reminal emulator software like reflectionX or Xvision.

# export DISPLAY=your-ip-adres:0.0

# swinstall

# swremove

Hope it helps,

Robert-Jan.

Re: Software Admin Question

Alzhy — Tue, 10 Jun 2003 12:57:59 GMT

Thanks for the replies.. I found out myself that this can be done via that GUI... I guess I was looking at a CLI that will do the trick instead of the GUI...

BTW, is there a tool/way to find out which software package/fileset a file (exe or otherwise) belongs to.. ie. if I want to know which fileset /usr/contrib/bin/perl belongs to?

Also, is it normal to for swinstall to not overwrite existing versions ie. perl? I installed 5.6.1 depot but the old perl is available in /usr/contrib/bin.

Re: Software Admin Question

Zeev Schultz — Tue, 10 Jun 2003 13:03:49 GMT

Nelson,
1)swlist -l file FilesetName/ProductName
2)Depends on software and swinstall options.Check /var/adm/sw/swagent log file.
3)What about points to those deserving?

Zeev

Re: Software Admin Question

Pete Randall — Tue, 10 Jun 2003 13:14:00 GMT

Nelson,

Yes, that's normal in this case. It depends on how the software was packaged and installed.

Pete

Re: Software Admin Question

Patrick Wallek — Tue, 10 Jun 2003 13:19:03 GMT

As said with new software, it depends entirely on how it is packaged and what its installation target is. With Perl as an example, the new version of Perl get installed into /opt/perl or /opt/perl5, etc. The version of Perl that is in /usr/contrib/bin was part of a different package, done when the OS was installed, and is quite old (Perl 4, I believe). The version in /usr/contrib/bin will remain when newer versions are installed and should actually be left there for some OS utilities that apparently haven't been upgraded or test with newer versions of Perl.

There is no one set answer to a lot of these questions. As with anything else in Unix the answer is "It Depends".

Re: Software Admin Question

Alzhy — Tue, 10 Jun 2003 13:49:33 GMT

Any answer as to how I find out what software/fileset a particular file belongs to? On Sun's I just grep for it in /var/sadm/install/contents file to get the package name.

Re: Software Admin Question

Jean-Louis Phelix — Tue, 10 Jun 2003 13:52:15 GMT

Hi,

You can find it using :

swlist -l file | grep progname

It will search in the IPD.

Regards.

Re: Software Admin Question

Zeev Schultz — Tue, 10 Jun 2003 13:54:24 GMT

Try this (I was looking where /etc/hosts belongs)

[ring]//etc/opt/resmon/lbin::swlist -l file | grep "/etc/hosts"

InternetSrvcs.INETSVCS-INETD: /etc/hosts
InternetSrvcs.INETSVCSINETD: /usr/newconfig/etc/hosts

Zeev