topic Bootup on a HP K460 server running HPUX 11.0 in Operating System - HP-UX

Bootup on a HP K460 server running HPUX 11.0

VWR Admin — Tue, 24 Oct 2000 13:20:04 GMT

When the system transitions to run level 2 on bootup, I receive an error message at the console stating stty :: not a typewriter. The server hangs & can only continue w/ a . This happened on our 1st reboot (3 mos. later) after we upgraded to 11.0 from 10.20.

The inittab has not changed. The /sbin/rc & rc.utils have not changed. Booted in single user mode & ran each script in rc2.d separately & did not produce the error.
rc.log & dmesg tells us nothing. The error appears after I type in "init 2".

Re: Bootup on a HP K460 server running HPUX 11.0

James R. Ferguson — Tue, 24 Oct 2000 13:24:57 GMT

Hi:

Check the contents of /sbin/rc2.d/ again. It sure sounds like someone has added a script there that is attempting to read stdin.

...JRF...

Re: Bootup on a HP K460 server running HPUX 11.0

MARTINACHE — Tue, 24 Oct 2000 13:25:22 GMT

Can you check that all drivers are OK, specialy for network cards:

ioscan -fnClan

Patrice.

Re: Bootup on a HP K460 server running HPUX 11.0

VWR Admin — Tue, 24 Oct 2000 13:49:42 GMT

problem is not with any of the scripts in rc2.d it has something to do with switching from init 1 to init 2 before the scripts start!