topic Re: using ps in Operating System - HP-UX

using ps

En Zhu — Thu, 03 Jul 2003 19:53:43 GMT

Hi,

Maybe I'm stupid, but I really need some helping with the ps command.

#ps -ef
...
root 7002 7001 0 15:50:47 ? 0:03 ns-httpd -d /usr/iplanet/servers/https-uscohu00.ca.com/confi
...

As you can see above, the command section got truncated. Is there any way that I can see the full command section?

Thank you.

Re: using ps

PIYUSH D. PATEL — Thu, 03 Jul 2003 19:59:00 GMT

Hi,

60 characters is the limit set at the kernel level as of 11.00 release.

Hence you are not getting the whole output.

HTH,
Piyush

Re: using ps

En Zhu — Thu, 03 Jul 2003 20:02:33 GMT

Hi, Piyush,

Do you mean there is no chance for me to see the full command section at all?
It's sad ...
Thank you.

En

Re: using ps

PIYUSH D. PATEL — Thu, 03 Jul 2003 20:03:31 GMT

Hi,

Have a look at this link. There are some solutions to this problem.

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x3b6142308663d611abdb0090277a778c,00.html

HTH,
Piyush

Re: using ps

A. Clay Stephenson — Thu, 03 Jul 2003 20:04:01 GMT

What you see is what you get but there is a patch to allow longer command line - it was really limited by the kernel (pstat() system call).

For 11.0, install PHKL_26008, PHKL_25999, & PHCO_26274 and you should be good to go.

Re: using ps

Caesar_3 — Thu, 03 Jul 2003 20:13:18 GMT

Hello!

Patches could solve the problem
check this one PHKL_25999 and
also the PHKL_26007 or the newer versions
of them, could be that i forgot something.
Long time that i forget it.

Caesar

Re: using ps

En Zhu — Thu, 03 Jul 2003 20:41:51 GMT

Thank you very much, it's really helpful.
Have a nice holiday.

En