topic Re: tooltalk authentication problem in Operating System - HP-UX

tooltalk authentication problem

Alexander Graf_2 — Thu, 17 Jul 2003 09:30:49 GMT

hi their,

since I had patched my maschines I get these
error messsages in syslog:

libtt[4222]: _Tt_session::client_session_init(): TT_AUTHFILE_ENTRY_MISSING

anybody a idea or solution?

thanks in advance for helping me on this

alex

Re: tooltalk authentication problem

RolandH — Thu, 17 Jul 2003 09:37:34 GMT

Could it be that your filesystem with the home dir is 100% full.

Have had even now the same error and the home dir lvol was 100% full.

Roland

Re: tooltalk authentication problem

Alexander Graf_2 — Thu, 17 Jul 2003 09:44:25 GMT

hi roland,

no, the disk space is fine.

alex

Re: tooltalk authentication problem

Alex Glennie — Thu, 17 Jul 2003 09:58:33 GMT

could you detail if your $HOME is nfs mounted at all ? Anything in $HOME/.dt/errorlog.log relating to the same timestamp as the errors in your sylog.log

Are all users affected ?

what patches did you install .... are you 100 % sure this only occurred afterwards ?

Re: tooltalk authentication problem

RolandH — Thu, 17 Jul 2003 09:58:50 GMT

Check the state of the installed patches with

swlist -l fileset -a state|more

all your filesets must have the state configured.
If not start the configuration with swconfig.

Start/Stop Xserver
/sbin/init.d/dtlogin.rc [stop|start]

See also your /var/adm/sw/swagent.log for errors

Have you installed the latest
CDE Patch and Xserver Patch?

Roland

Re: tooltalk authentication problem

Alexander Graf_2 — Thu, 17 Jul 2003 11:12:30 GMT

hi,

first, all patches are installed(swagent.log) and configured correctly.

is their a way to diable this feature?

thanks for the help
alex

Re: tooltalk authentication problem

RolandH — Thu, 17 Jul 2003 13:43:00 GMT

What version of HP-UX is installed on your machine and what patches have you installed?

Check that you have installed the latest CDE Patch

11.00 PHSS_28675
11.11 PHSS_28676

As you can see in the patch text, the error mesg. you get in syslog is not correct reportet.

Have you any trouble with your machine or is this only this error message.

Please, give us more info from your system and what you have done.

Roland