topic Re: samlog_viewer in Operating System - HP-UX

samlog_viewer

Richard Ace_1 — Thu, 31 Jul 2003 14:54:31 GMT

I was trying to us samlog_viewer to find out a command in sam, by using the following command.

For the year field it requires two digits
So I used 03

This gave me year 1903

See attachment

So I tried 2003 just in case

This gave me year 1920

I can change it in the sam menu field no problem.

errrrrrrrrrrrrrmmm! Is there somthing adrift here?

samlog_viewer -s 0731080003 -e 0731210003 -lC -u root

samlog_viewer -s 073108002003 -e 073121002003 -lC -u root

Re: samlog_viewer

Steven E. Protter — Thu, 31 Jul 2003 15:04:19 GMT

Have we uncovered a Y2K problem?

Or are we missing a patch.

Check that you are current on sam patches.

SEP

Re: samlog_viewer

Richard Ace_1 — Thu, 31 Jul 2003 15:16:03 GMT

I have looked at SW and thing may be a little behind . Not too sure though

swlist -l bundle | grep -E 'XSW|HWE|QPK|SAM'

HWE1100 B.11.00.0206.5 Hardware Enablement Patches for HP-UX 11.00, June 2002

QPK1100 B.11.00.54.7 Quality Pack for HP-UX 11.00, September 2001

XSWGR1100 B.11.00.47.08 General Release Patches, November 1999 (ACE)
XSWHWCR1100 B.11.00.54.6 HP-UX Hardware Enablement and Critical Patches, September 2001

Cheers

Rich

May need to add some

Re: samlog_viewer

Darren Prior — Fri, 01 Aug 2003 08:51:33 GMT

Hi Richard,

As far as I'm aware this issue has been fixed in 11i, but not fixed yet in 11.00. The workaround would be to start up the samlog_viewer without the -s and -e options, then set them inside the GUI, which is able to accept 4 digit years.

There is an SR raised for this issue; the number is 8606296648.

regards,

Darren.

Re: samlog_viewer

Hemanth Gurunath Basrur — Mon, 04 Aug 2003 16:30:43 GMT

Hello Richard,

Thanks for your message.
The reported problem has been fixed and will be available via patch which will be delivered in December 2003.

Let me know if you need more information.

Hope this helps.

Thanks,
Hemanth