topic Re: D220 HPUX install problem in Operating System - HP-UX

D220 HPUX install problem

hp_user_1 — Sun, 03 Aug 2003 22:59:28 GMT

Hello,

I am having trouble installing HPUX 11.0 on a D220 machine. From PDC I boot from the CD. The system is supposed to display a screen showing server h/w summary with choices for installing or recovering the OS but it does not stop there instead it continues and goes to the recovery menu. I tried this several times and every time I had this problem.

I am using Windows 2000 hyper terminal set to VT100, 9600/0/1/None.....

Please help..............

Re: D220 HPUX install problem

Patrick Wallek — Sun, 03 Aug 2003 23:18:05 GMT

The terminal setting is almost surely your problem. The terminal is sending a signla that the installation program is probably interpreting as a CR thus sending you to recovery menu.

I have always had better luck installing from regular HP terminal connected directly to the machine.

Re: D220 HPUX install problem

hp_user_1 — Sun, 03 Aug 2003 23:24:26 GMT

I used exactly the same setup to install the OS on other servers multiple times. Same CD, same terminal setup, same PC....I installed on one other server just yesterday with the same setttings and I all went fine. But this one I don't understand. I don't have a console right now...

Re: D220 HPUX install problem

Michael Steele_2 — Sun, 03 Aug 2003 23:25:42 GMT

Try changing your TERM type to one of the following:

export TERM=hp

export TERM=70096

Also, please post the exact name and product number of the cd.

Re: D220 HPUX install problem

Michael Steele_2 — Sun, 03 Aug 2003 23:31:30 GMT

Also, could you recycle the power and note any FLT messages on the LED? For example, FLT B#00.

Re: D220 HPUX install problem

Steven E. Protter — Sun, 03 Aug 2003 23:38:56 GMT

This is an install best done from a console.

The only way the Ignite Interface will work right is if the TERM type is hp.

SEP

Re: D220 HPUX install problem

Michael Tully — Mon, 04 Aug 2003 08:58:56 GMT

This is also the perfect time to make sure that you have the latest firmware installed as well.

Re: D220 HPUX install problem

Tim D Fulford — Mon, 04 Aug 2003 10:28:05 GMT

Hi

I might be going mad... but my experience of Ignite is the you HAVE TO HAVE terminal EMULATING vt100 or em100 (ctrl+Scroll-Lock). ALSO there is no shell, so things like "export TERM=xyz" is not possible, you are in the PDC/ISL "shell" & then the Ignite "recovery shell", none of which do you get the chance to set TERM parameter.....

On a different tack...
how are you booting the system?
1a - booot
1b - reply N to interacting with ISL
OR
2a - boot
2b - reply y to interacting with ISL
2c - hpux :INSTALL

I generally have more success with the second method as I've seen the first fail for various reasons.

Regards

Tim