topic Re: swinstall message in Operating System - HP-UX

swinstall message

Sonison James — Tue, 12 Aug 2003 20:36:58 GMT

I am doing an swinstall of a depot that I created and I get the following message.

"madera:/home/james/testagent.depot": Cannot open the logfile on this target or source. Possibly the media is read-only or there is a permission problem. Check the daemon logfile and "/var/tmp/swagent.log" on this host for more information.

swinstall command:
swinstall -s $PWD/testagent.depot TestAgent

The installation seems to go through and there is no problem otherwise. However I am curious as to why this message occurs. The swagent.log file also indicates no problem.

Re: swinstall message

Jeff Schussele — Tue, 12 Aug 2003 21:31:25 GMT

Hi James,

Never seen that message before, but normally HP logs all sw util msgs in /var/adm/sw directory. And normally one must be root to run most sw.... utils - I wonder if you ran this as a "normal" user & you didn't have perms to log the activity.
Check /var/adm/sw/swinstall.log on this system to see if it indeed logged there. Else I think you'd have had to override that log dir location.
Hey & if it installed AOK - no harm no foul.

Rgds,
Jeff

Re: swinstall message

Tim Adamson_1 — Tue, 12 Aug 2003 22:07:35 GMT

Hi,

The message is probably caused by the way the depot was packaged.

Can you post how you packaged the depot?

There is no harm in the message as you obviously have seen and the install succeeded.

Tim

Re: swinstall message

Sonison James — Tue, 12 Aug 2003 23:42:20 GMT

I prepared the depot in this way

swpackage -v -s agent.psf -x media_type=tape @ test.depot

Re: swinstall message

Tim Adamson_1 — Tue, 12 Aug 2003 23:45:24 GMT

Hi,

Thanks for posting your command.

The media_type=tape option makes SD-UX think it is a tape archive and hence the swinstall log can't be written to a tape/cdrom source. The message can be safely ignored!

Hope it helps.

Tim