topic Re: Problem with chatr in Operating System - HP-UX

Problem with chatr

Sonison James — Fri, 15 Aug 2003 01:52:04 GMT

Hello,

I had compiled an application using gcc on one machine and ported it onto another which did not have gcc installed on it. Initially the application used to core dump as it was not looking for the gcc libs in the SHLIB_PATH. Using chatr solved the problems on a PA-RISC mchine but on an IPF I got an error:
chatr(error): file is not a valid ELF file

The application was compiled on a 32 bit PA-RISC. Help with resolving this problem will be highly appreciated.

Thanks and regards
Sonison James

Re: Problem with chatr

Stefan Farrelly — Fri, 15 Aug 2003 06:49:48 GMT

I dont believe you can run 32bit PA-RISC binaries on an IPF machine - the architecture is too different. You must recompile on IPF to 64bit.

Re: Problem with chatr

Sonison James — Fri, 15 Aug 2003 16:21:52 GMT

Hello Stefan,

The application works on the IPF without recompilation, the only problem is that it is not looking for the gcc libs in my SHLIB_PATH but in /usr/local/lib. Using chatr enabled SHLIB_PATH for the application on a PA-RISC but it gives an error (chatr(error): file is not a valid ELF file) on the IPF.

Thanks and regards
Sonison James

Re: Problem with chatr

Bhuvaneswari Selvaraj — Sat, 16 Aug 2003 04:54:32 GMT

PA-RISC binaries can run on IPF platform using an Aries emulator.

But chatr on a IPF machine will recognise only IPF binaries. If you want to do a chatr on the same, take the binary/application to a PA system and do a chatr there. I mean only a PA chatr binary/command can read/recognise a PA RISC binary or application.

The chatr command/binary on a IPF machine can recognise only a IPF binary.

Re: Problem with chatr

Sonison James — Tue, 19 Aug 2003 00:17:29 GMT

Hello Bhuvaneswari,

The fix suggested by you solved my problem.

Thanks and regards
Sonison james

Re: Problem with chatr

Mike Stroyan — Thu, 21 Aug 2003 20:59:34 GMT

There is a PA-RISC chatr and other tools in the
11.22 release. You can run them for PA-RISC
programs by setting the SDKROOT environment
variable-

SDKROOT=/usr/ccs/pa chatr a.out