https://community.hpe.com/t5/operating-system-hp-ux/upgrade-help/m-p/2426262#M1397 <BR />Remaping of addresess is not very easy, and you may get some problems.<BR /><BR />Instead you can export each vg in your AutoRaid before hardware change.<BR /><BR />When you reboot new device files are created automaticaly.<BR /><BR />Then, vgimport each vg using new device files.<BR />Vgexport/Vgimport are designed for this.<BR />IT is much easy. <BR /><BR />Regards<BR /><BR /> Thu, 15 Jun 2000 08:49:25 GMT Carlos Fernandez Riera 2000-06-15T08:49:25Z https://community.hpe.com/t5/operating-system-hp-ux/upgrade-help/m-p/2426261#M1396 I will be upgrading from a K260 to a K360. The upgrade will eliminate HPPB slot 10/4/12, which is currently in use by our controller on the K260.<BR /><BR />What are the steps to re-map the address and not lose any of the volume groups?<BR /><BR />Note: Running HP-UX 10.20<BR /><BR />The controller affected is 1 of 2 attached to an AutoRaid. Wed, 14 Jun 2000 14:04:29 GMT https://community.hpe.com/t5/operating-system-hp-ux/upgrade-help/m-p/2426261#M1396 Thomas Luong 2000-06-14T14:04:29Z https://community.hpe.com/t5/operating-system-hp-ux/upgrade-help/m-p/2426262#M1397 <BR />Remaping of addresess is not very easy, and you may get some problems.<BR /><BR />Instead you can export each vg in your AutoRaid before hardware change.<BR /><BR />When you reboot new device files are created automaticaly.<BR /><BR />Then, vgimport each vg using new device files.<BR />Vgexport/Vgimport are designed for this.<BR />IT is much easy. <BR /><BR />Regards<BR /><BR /> Thu, 15 Jun 2000 08:49:25 GMT https://community.hpe.com/t5/operating-system-hp-ux/upgrade-help/m-p/2426262#M1397 Carlos Fernandez Riera 2000-06-15T08:49:25Z