topic date in Operating System - HP-UX

date

Corthouts Carlo — Mon, 15 Sep 2003 08:18:49 GMT

Recently I started implementing ntp timesynchronisation, but at the moment they are using date -a sss.xxxx to slew time forward or backward.
As a difference is not immediately visible I wonder how the date -a is working. I know that the system clock is slowed down or sped up. But how long does it take for time to adjust with for example 60s.

Re: date

Paula J Frazer-Campbell — Mon, 15 Sep 2003 08:45:38 GMT

Hi

From man date

-a [-]sss[.fff]
Slowly adjust the time by sss.fff seconds (fff represents fractions of a second). This adjustment can be positive or negative. The system's clock will be sped up or slowed down until it has drifted by the number of seconds specified.

The .fff part of the command defines the speed of the slow up/down, so the speed is defined by the command that you enter.

Paula

Re: date

Stefan Farrelly — Mon, 15 Sep 2003 08:49:45 GMT

I seem to recall it slews very slowly, 60s could take a day or two to sync.

Re: date

Steven Gillard_2 — Mon, 15 Sep 2003 09:52:33 GMT

Slewing of the clock is performed by the adjtime(2) system call - see the man page for more information. The speed is not configurable, but from what I remember it is about 20% faster or slower than normal time - it seems to take about 5 minutes to perform a 1 minute change.

Theres a program that uses adjtime in the following thread (very last post):

http://bizforums.itrc.hp.com/cm/QuestionAnswer/0,,0x7d9303bbece8d5118ff40090279cd0f9,00.html

Regards,
Steve

Re: date

Murgesh_2 — Mon, 15 Sep 2003 10:19:29 GMT

If you need to step up the time with Immidiate you can use ntpdate

Slew will take 24 hrs apprx, i mean you can come in the morning and see that time is in sync.

Enjoy
Murgesh

Re: date

john korterman — Mon, 15 Sep 2003 10:27:37 GMT

Hi,

I have used this function on several occasions and has not yet been able to detect anything signifying if the function is in progress or not.
Anyway, I never try to slew more than 60 seconds at a time and I alway let 10 minutes pass between each execution. Not very precise, but till now this has worked for me.

regards,
John K.