https://community.hpe.com/t5/operating-system-hp-ux/getty-process-problem/m-p/3073462#M141209 Sorry I found that I have to logout in kermit connet mode at the client to recover the host's getty process. Wed, 17 Sep 2003 15:38:19 GMT Jun Zhang_4 2003-09-17T15:38:19Z https://community.hpe.com/t5/operating-system-hp-ux/getty-process-problem/m-p/3073461#M141208 inittab entry,<BR />a0:3:respawn:/usr/sbin/getty -h ttyd0p7 ult9600<BR />corresponds to a running process,<BR />root 3067 1 0 11:45:45 ttyd0p7 0:00 /usr/sbin/getty -h ttyd0p7 ult9600<BR /><BR />After a modem connected from somewhere, the above process becomes,<BR />root 3067 1 0 11:45:45 ttyd0p7 0:00 -ksh<BR />This process will remain even after the remote modem hungup. Now if the remote modem want to make a new connection, it will hang after the CONNECT message. If I kill the -ksh process (has to use -9), a new process will be spawned like the first one listed above, and the remote connection will be normal.<BR /><BR />This is a E35 hpux 11.00.<BR />What is the problem?<BR /><BR /><BR />Jun<BR /><BR /> Wed, 17 Sep 2003 15:21:28 GMT https://community.hpe.com/t5/operating-system-hp-ux/getty-process-problem/m-p/3073461#M141208 Jun Zhang_4 2003-09-17T15:21:28Z https://community.hpe.com/t5/operating-system-hp-ux/getty-process-problem/m-p/3073462#M141209 Sorry I found that I have to logout in kermit connet mode at the client to recover the host's getty process. Wed, 17 Sep 2003 15:38:19 GMT https://community.hpe.com/t5/operating-system-hp-ux/getty-process-problem/m-p/3073462#M141209 Jun Zhang_4 2003-09-17T15:38:19Z