topic Re: error -- in Operating System - HP-UX

error --

mahesh_24 — Thu, 18 Sep 2003 05:49:49 GMT

Pid 2670 killed due to text modification or page I/O error

i am getting the above error when i execute one of the excutables .anu clues whats happening here

Re: error --

T G Manikandan — Thu, 18 Sep 2003 05:58:37 GMT

check your memory and swap usage.
If they are full try increasing more swap.

make sure you load the appropriate patches.

This is the HPDOC

http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000062925494

Re: error --

Mark Grant — Thu, 18 Sep 2003 05:59:04 GMT

I'm not sure why this happens and there may be a patch to fix it but you can do the following.

"mv" the executable to a tempory location and then "cp" it back.

Re: error --

T G Manikandan — Thu, 18 Sep 2003 06:00:45 GMT

Also do check the /var/adm/syslog/syslog.log for any errors on the swap disk

Re: error --

mahesh_24 — Thu, 18 Sep 2003 06:27:11 GMT

swap and memory are enough ans my patches are up to date. but still its happening .i tried mv also.

Re: error --

Mark Grant — Thu, 18 Sep 2003 06:36:46 GMT

OK it seems that HP-UX provides this helpful error when it tries to page in an executable and times out. The time out is apparently rather low.

Is your application on NFS or for some other reason might take a while to load?

Re: error --

mahesh_24 — Thu, 18 Sep 2003 07:11:46 GMT

No application is not on NFS , its on local fs.