topic Re: jetadmin in Operating System - HP-UX

jetadmin

Keith Floyd — Fri, 03 Nov 2000 11:48:06 GMT

How do I setup non -HP network printers ??

Is is as simple as picking dumbplot model from the list ??

Thanks

Keith

Re: jetadmin

federico_3 — Fri, 03 Nov 2000 12:49:20 GMT

For non-HP printers you should set these as remote printers via SAM. Try :
"SAM" -> Printers/plotters -> add Remote Printer/Plotter.

federico

Re: jetadmin

Devbinder Singh Marway — Fri, 03 Nov 2000 13:02:31 GMT

what emulation is your printer set to ? if set to hp , then use jetadmin and select the hp printer as relevant, you will see it uses hpnpf program to print to the printer as the filter. If you have no hp emulation on the printer , you have to select a dumb model script and the tailor it i.e. you have to set the FILTER hpnpf etc.. in the dumb model script to print to the printer rather than using cat , to print to the file .

Re: jetadmin

FOREST Michel — Fri, 03 Nov 2000 13:15:10 GMT

/opt/hpnp/bin/jetadmin
--> 1) Configuration
--> 3) Add
--> IP or Name
--> 52) To Select dumbplot model script for plotter

Bye Lo.

Re: jetadmin

Victor BERRIDGE — Fri, 03 Nov 2000 17:37:58 GMT

Here are 2 previous mails on the subject:
http://my1.itrc.hp.com/cm/QuestionAnswer/1,1150,0x164c68c57f64d4118fee0090279cd0f9,00.html

http://my1.itrc.hp.com/cm/QuestionAnswer/1,1150,0x88ff6c96588ad4118fef0090279cd0f9,00.html

Good luck
Victor