topic Advice needed in Operating System - HP-UX

Advice needed

SM_3 — Thu, 25 Sep 2003 09:54:47 GMT

We are using FC-AL in our environment, soon will be moving to Fabric.

As a hp-ux admin how much do I need to know about how FC works?

Thanks.

Re: Advice needed

Hari Kumar — Thu, 25 Sep 2003 10:04:26 GMT

I may not be able to advice you,
but a line of help, Goto This URL

http://education.hp.com/justforyou/
and check out the course and one more URL

where u can check out some technical info based on the PRODUCT u r going to use
http://h18006.www1.hp.com/storage/saninfrastructure.html

best regards,

Re: Advice needed

Jeff Schussele — Thu, 25 Sep 2003 10:08:13 GMT

Hi SM,

Not that much.
You should know the differences of fibre types & the associated connector types. You need to know the basic commands like fcmsutil & such.

But the biggest thing that you need to know is *which* fibre channel cards support switched fabric & which don't. For instance, the 3404 does NOT support switched fabric, but the 5158 does.

If you're to be responsible for installing, cabling, carving & zoning the arrays, then you'll need to know more than SAs who don't have this responsibility.

HTH,
Jeff

Re: Advice needed

Steven E. Protter — Thu, 25 Sep 2003 10:13:57 GMT

Getting the Fabric card working isn't that hard at all. You get it installed, install the software, your machine boots, then its active.

I can't speak to the concept of setting up disks and making them available to various servers. We don't have HP disk. Most disk arrays have easy to use gui interfaces for everything except zoning.

SEP