topic Re: Machine Not Booting in Operating System - HP-UX

Machine Not Booting

varian_1 — Sat, 04 Oct 2003 02:29:21 GMT

Hi,

My HP server J5000 not booting it has two OS installed 11i & 11.0 it is not booting in either of the OS. On LCD display of the machine I am getting " INI CC01: " code & on console it is showing
Boot
:disk(10/0/15/1.6.0.0.0.0.0;0)/stand/vmunix
10772480 + 1740800 + 10807304 start ox1f12e8

Can some body let us know what exactly happening.

Thanks in advance

Regards
Walter Crasto

Re: Machine Not Booting

aparna challagulla — Sat, 04 Oct 2003 03:09:27 GMT

hi Walter,

Pl go thro the following thread where a similar situation has been discussed and a link is provided for a list error codes.
http://forums1.itrc.hp.com/service/forums/parseCurl.do?CURL=%2Fcm%2FQuestionAnswer%2F0%2C%2C0x0b08543254bfd611abdb0090277a778c%2C00.html&admit=716493758+1065254619393+28353475

HTH
aparna

Re: Machine Not Booting

Michael Steele_2 — Sat, 04 Oct 2003 07:21:04 GMT

INI - HW being initialized

This is not what you're looking for. You need to note the fault code.

FLT CCCC

Refer to page 59 for J5000 FLT codes:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/lpv37971/lpv37971.pdf

The link above is for a K class server and not specific to you J Class work station, so you can disregard it.