topic Re: Basic DLT question - d350 / 4000s in Operating System - HP-UX

Basic DLT question - d350 / 4000s

HP System Handle Owner — Tue, 14 Oct 2003 04:56:49 GMT

I am trying to add a dlt400s to a d350.

I have stape and tape2 in the kernel, but when I connect the device and issue an ioscan -fnCtape, it is not reporting reported either CLAIMED or UNCLAIMED. I know that the device works as it has come from a K server. I have tried issuing an insf, but it does not see the device. The device is attached to the single ended port on the back. I have tried another dlt4000 unit and have the same issue. Both have scsi id's of 0

I have attached an ioscan -fn, and the /stand system file for reference. I don't really want to have to reboot if possible.

Cheers in advance

Russell

ioscan

Class I H/W Path Driver S/W State H/W Type Description
=======================================================================
bc 0 root CLAIMED BUS_NEXUS
bc 1 8 ccio CLAIMED BUS_NEXUS I/O Adapter
bc 2 8/0 bc CLAIMED BUS_NEXUS Bus Converter
tty 0 8/0/0 mux2 CLAIMED INTERFACE MUX
/dev/diag/mux0 /dev/diag/tty0p14 /dev/diag/tty0p7 /dev/tty0p11 /dev/tty0p4
/dev/diag/tty0p0 /dev/diag/tty0p15 /dev/diag/tty0p8 /dev/tty0p12 /dev/tty0p5
/dev/diag/tty0p1 /dev/diag/tty0p2 /dev/diag/tty0p9 /dev/tty0p13 /dev/tty0p6
/dev/diag/tty0p10 /dev/diag/tty0p3 /dev/mux0 /dev/tty0p14 /dev/tty0p7
/dev/diag/tty0p11 /dev/diag/tty0p4 /dev/tty0p0 /dev/tty0p15 /dev/tty0p8
/dev/diag/tty0p12 /dev/diag/tty0p5 /dev/tty0p1 /dev/tty0p2 /dev/tty0p9
/dev/diag/tty0p13 /dev/diag/tty0p6 /dev/tty0p10 /dev/tty0p3
ext_bus 0 8/4 c720 CLAIMED INTERFACE GSC add-on Fast/Wide SCSI Interface
target 0 8/4.2 tgt CLAIMED DEVICE
disk 0 8/4.2.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t2d0 /dev/rdsk/c0t2d0
target 1 8/4.3 tgt CLAIMED DEVICE
disk 1 8/4.3.0 sdisk CLAIMED DEVICE SEAGATE ST32272WC
/dev/dsk/c0t3d0 /dev/rdsk/c0t3d0
target 2 8/4.4 tgt CLAIMED DEVICE
disk 2 8/4.4.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t4d0 /dev/rdsk/c0t4d0
target 3 8/4.5 tgt CLAIMED DEVICE
disk 3 8/4.5.0 sdisk CLAIMED DEVICE SEAGATE ST34371W
/dev/dsk/c0t5d0 /dev/rdsk/c0t5d0
target 4 8/4.6 tgt CLAIMED DEVICE
disk 4 8/4.6.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
target 5 8/4.7 tgt CLAIMED DEVICE
ctl 0 8/4.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c0t7d0
target 6 8/4.8 tgt CLAIMED DEVICE
disk 5 8/4.8.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t8d0 /dev/rdsk/c0t8d0
target 7 8/4.9 tgt CLAIMED DEVICE
disk 6 8/4.9.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t9d0 /dev/rdsk/c0t9d0
target 8 8/4.10 tgt CLAIMED DEVICE
disk 7 8/4.10.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t10d0 /dev/rdsk/c0t10d0
target 9 8/4.11 tgt CLAIMED DEVICE
disk 8 8/4.11.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t11d0 /dev/rdsk/c0t11d0
target 13 8/4.15 tgt CLAIMED DEVICE
disk 10 8/4.15.0 sdisk CLAIMED DEVICE SEAGATE ST32550W
/dev/dsk/c0t15d0 /dev/rdsk/c0t15d0
ba 0 8/16 bus_adapter CLAIMED BUS_NEXUS Core I/O Adapter
ext_bus 2 8/16/0 CentIf CLAIMED INTERFACE Built-in Parallel Interface
/dev/c2t0d0_lp
ext_bus 1 8/16/5 c720 CLAIMED INTERFACE Built-in SCSI
target 10 8/16/5.0 tgt CLAIMED DEVICE
tape 0 8/16/5.0.0 stape CLAIMED DEVICE HP C1533A
/dev/rmt/0m /dev/rmt/0mn /dev/rmt/c1t0d0BEST /dev/rmt/c1t0d0BESTn
/dev/rmt/0mb /dev/rmt/0mnb /dev/rmt/c1t0d0BESTb /dev/rmt/c1t0d0BESTnb
target 11 8/16/5.2 tgt CLAIMED DEVICE
disk 9 8/16/5.2.0 sdisk CLAIMED DEVICE TOSHIBA CD-ROM XM-4101TA
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
target 12 8/16/5.7 tgt CLAIMED DEVICE
ctl 1 8/16/5.7.0 sctl CLAIMED DEVICE Initiator
/dev/rscsi/c1t7d0
lan 0 8/16/6 lan2 CLAIMED INTERFACE Built-in LAN
/dev/diag/lan0 /dev/ether0 /dev/i4target /dev/lan0
ps2 0 8/16/7 ps2 CLAIMED INTERFACE Built-in Keyboard/Mouse
/dev/ps2_0 /dev/ps2_1 /dev/ps2kbd /dev/ps2mouse
ba 1 8/20 bus_adapter CLAIMED BUS_NEXUS Core I/O Adapter
tty 1 8/20/2 asio0 CLAIMED INTERFACE Built-in RS-232C
/dev/diag/mux1 /dev/mux1 /dev/tty1p0
ba 2 8/20/5 eisa CLAIMED BUS_NEXUS EISA Bus Adapter
bc 3 10 ccio CLAIMED BUS_NEXUS I/O Adapter
processor 0 32 processor CLAIMED PROCESSOR Processor
processor 1 34 processor CLAIMED PROCESSOR Processor
memory 0 49 memory CLAIMED MEMORY Memory

/stand/system

* Drivers and Subsystems

CentIf
CharDrv
asio0
asp
beep
c720
ccio
cdfs
cio_ca0
clone
core
diag0
diag1
diag2
disc3
dlpi
dmem
echo
eeprom
eisa
ffs
hpstreams
inet
inet_clts
inet_cots
klog
lan2
lasi
ldterm
lv
lvm
mux2
netdiag1
netman
nfs
ni
pa
pckt
pfail
pipedev
pipemod
ps2
ptem
ptm
pts
sad
sc
scsi1
scsi2
sctl
sdisk
sio
stape
strlog
strpty_included
tape2
tape2_included
target
timod
tirdwr
tpiso
uipc
vxbase
wsio

* Kernel Device info

dump lvol

* Tunable parameters

dbc_max_pct 10
maxfiles 512
msgmax 32768
msgmnb 32768
msgseg 7168
msgtql 256
ncallout 568
nfile 1232
ninode 3008
nproc 552
nstrpty 60
semmni 128
semmns 1000
shmmax 1073741824
shmseg 12

Re: Basic DLT question - d350 / 4000s

Pete Randall — Tue, 14 Oct 2003 05:10:49 GMT

I think you've got a F/W device connected to a SE port. Check how they were connected on the K - I think you'll find that the port was F/W. They won't work on SE, you've got a SCSI conflict and that's why the devices aren't being recognised.

Pete

Re: Basic DLT question - d350 / 4000s

Rajeev Shukla — Tue, 14 Oct 2003 05:11:53 GMT

Hi Russell,
DLT4000 is not a single ended device, use this on a fastwide SCSI controller then you'll be able to see the device properly.

Cheers
Rajeev

Re: Basic DLT question - d350 / 4000s

HP System Handle Owner — Tue, 14 Oct 2003 05:22:53 GMT

Chaps,

Thanks for your replies.

I'm not so sure that is is F/W though. The tape unit has 2 x 50 pin connectors on the back and it was connected to the Hp-PB SCSI (SE) card in the K box. (It does not have 68 pin connectors on it)

Bit more info, the model number of the unit is CTS 2210-HP. It is connected to (8)/16/5

Cheers

Russ

Re: Basic DLT question - d350 / 4000s

Eugeny Brychkov — Tue, 14 Oct 2003 05:26:55 GMT

Yes, please check if it's HVD or not and DO NOT connect it to SE if it's HVD.
Your server has only one HVD adapter at 8/4, and looks like it's already overloaded with disks (I guess there's Jamaica box connected). I suggest to add one mode HVD adapter to connect the tape drive. If it's not possible... then connect it to this one (daisy chain with Jamaica), but remember: your root/swap/boot disks are on this bus!
Eugeny

Re: Basic DLT question - d350 / 4000s

Eugeny Brychkov — Tue, 14 Oct 2003 05:31:26 GMT

Ok, there's only one SE adapter
ext_bus 1 8/16/5 c720 CLAIMED INTERFACE Built-in SCSI
which already has device with SCSI Id=0 connected
tape 0 8/16/5.0.0 stape CLAIMED DEVICE HP C1533A
so please change DLT's SCSI Id to 1 (for example) first
Eugeny

Re: Basic DLT question - d350 / 4000s

Stefan Farrelly — Tue, 14 Oct 2003 05:48:59 GMT

Youve got to plug it into 8/16/5 (50 pin SE controller) and change the scsi id - scsi 0 is alread used for the DDS drive. Change it to anything except 0, 2 (CD) or 7 (scsi controller).

Re: Basic DLT question - d350 / 4000s

HP System Handle Owner — Tue, 14 Oct 2003 06:24:53 GMT

Thanks all, I was sure it wasn't F/W !!

Changing the scsi id to 1 made me able to see a line in ioscan, so i did an insf and now I can see it and backup to it using fbackup.

Many thanks to all for your help

Points assigned out !

Cheers