https://community.hpe.com/t5/operating-system-hp-ux/scm-question/m-p/3116064#M149802 Hello!<BR />We are using SCM and it displays the ouput only for one node at the time and I must click on every node to see the results.<BR />I wonde if it's possible to make it display the results of all nodes on the same page, one after another.<BR /><BR />thanx. Tue, 11 Nov 2003 09:31:46 GMT Alex Lavrov 2003-11-11T09:31:46Z https://community.hpe.com/t5/operating-system-hp-ux/scm-question/m-p/3116064#M149802 Hello!<BR />We are using SCM and it displays the ouput only for one node at the time and I must click on every node to see the results.<BR />I wonde if it's possible to make it display the results of all nodes on the same page, one after another.<BR /><BR />thanx. Tue, 11 Nov 2003 09:31:46 GMT https://community.hpe.com/t5/operating-system-hp-ux/scm-question/m-p/3116064#M149802 Alex Lavrov 2003-11-11T09:31:46Z https://community.hpe.com/t5/operating-system-hp-ux/scm-question/m-p/3116065#M149803 no. If i understand the question correctly.<BR />....<BR />if you select 5 nodes to run the tool (bdf for example) at the same time. You will be taken to a results page. From here you will need to click on the node you wish to see the result for. This is probably to prevent clutter and confusion as to which node you are viewing. Tue, 11 Nov 2003 10:28:19 GMT https://community.hpe.com/t5/operating-system-hp-ux/scm-question/m-p/3116065#M149803 John Meissner 2003-11-11T10:28:19Z