topic Re: Adding network printers in SAM in Operating System - HP-UX

Adding network printers in SAM

Ian Warner — Mon, 17 Nov 2003 09:07:11 GMT

I have added a network printer using SAM. I now need to print to that device using the device name, but SAM has set it it be /dev/null. How can I set the device so I can access it via a device name?

Re: Adding network printers in SAM

G. Vrijhoeven — Mon, 17 Nov 2003 09:23:55 GMT

Hi,

Network printers have /dev/null as device.
You can check out all your configured printers using:
lpstat -t

Use the name of the spooler to print to.

Gideon

Re: Adding network printers in SAM

Ian Warner — Mon, 17 Nov 2003 09:26:40 GMT

I would normally, however, the compiler I am using needs the device name if I am sending a print that displays a forms message. Does this mean I cannot do this to a network printer?

Re: Adding network printers in SAM

John Palmer — Mon, 17 Nov 2003 09:35:49 GMT

Hi Ian,

DDFA allows you to configure this.

man ddfa

Regards,
John

Re: Adding network printers in SAM

Hemanth Gurunath Basrur — Mon, 17 Nov 2003 13:05:50 GMT

Hello Ian,

Refer to the foll. doc for info.

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5187-2216/5187-2216_top.html&con=/hpux/onlinedocs/5187-2216/00/00/44-con.html&toc=/hpux/onlinedocs/5187-2216/00/00/44-toc.html&searchterms=network%7cprinters%7cin%7cSAM%7cAdding&queryid=20031117-110117

HTH.

Regards,
Hemanth