https://community.hpe.com/t5/operating-system-hp-ux/console-monitor-type/m-p/3126169#M152009 I am running HP-UX 10.20 and would like to know if there is any way to change or determine the console/monitor configuration like you can do at boot time? Fri, 21 Nov 2003 13:10:10 GMT Jim Corbett 2003-11-21T13:10:10Z https://community.hpe.com/t5/operating-system-hp-ux/console-monitor-type/m-p/3126169#M152009 I am running HP-UX 10.20 and would like to know if there is any way to change or determine the console/monitor configuration like you can do at boot time? Fri, 21 Nov 2003 13:10:10 GMT https://community.hpe.com/t5/operating-system-hp-ux/console-monitor-type/m-p/3126169#M152009 Jim Corbett 2003-11-21T13:10:10Z https://community.hpe.com/t5/operating-system-hp-ux/console-monitor-type/m-p/3126170#M152010 Some graphics cards can have their monitor settings changed by /opt/graphics/common/bin/setmon. Older graphics cards could not be configured by setmon.<BR /><BR /> You can change the boot path with setboot, but cannot change the console path without using the boot rom menus. Fri, 21 Nov 2003 13:45:43 GMT https://community.hpe.com/t5/operating-system-hp-ux/console-monitor-type/m-p/3126170#M152010 Mike Stroyan 2003-11-21T13:45:43Z