https://community.hpe.com/t5/operating-system-hp-ux/wbem-problem/m-p/3126675#M152111 Hello!<BR /><BR />I have a problem with configuring WBEM, <BR />after a command:<BR />/opt/mx/bin/mxnode -a -i srv1<BR />WBEM collector failed on srv1; invalid user credential.<BR /><BR />I get it only on a few servers, the others are OK. The password of mx is the same on all servers ...<BR /><BR />Any ideas?<BR /><BR />thanx Sun, 23 Nov 2003 02:58:40 GMT Alex Lavrov 2003-11-23T02:58:40Z https://community.hpe.com/t5/operating-system-hp-ux/wbem-problem/m-p/3126675#M152111 Hello!<BR /><BR />I have a problem with configuring WBEM, <BR />after a command:<BR />/opt/mx/bin/mxnode -a -i srv1<BR />WBEM collector failed on srv1; invalid user credential.<BR /><BR />I get it only on a few servers, the others are OK. The password of mx is the same on all servers ...<BR /><BR />Any ideas?<BR /><BR />thanx Sun, 23 Nov 2003 02:58:40 GMT https://community.hpe.com/t5/operating-system-hp-ux/wbem-problem/m-p/3126675#M152111 Alex Lavrov 2003-11-23T02:58:40Z https://community.hpe.com/t5/operating-system-hp-ux/wbem-problem/m-p/3126676#M152112 Anything else showing besides the error message you list?<BR /><BR />For example:<BR />Running: /opt/mx/bin/mxnode -a -i s1 s2<BR />WBEM collector failed on s2; invalid user credential.<BR />Duplicate node: "s2". Node not added.<BR />Completed with errors.<BR /><BR />The above would occur if s2 was the CMS, it is already a managed node for itself and therefore complains when you try to add it as a managed node.<BR /><BR />does:<BR />/opt/mx/bin/mxexec -t df -n srv1 <BR />work? <BR /><BR />Are your java patches consistent across all nodes? <BR /><BR /> Wed, 26 Nov 2003 01:36:03 GMT https://community.hpe.com/t5/operating-system-hp-ux/wbem-problem/m-p/3126676#M152112 Dan Yeatman 2003-11-26T01:36:03Z