https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130062#M152841 The closest thing I can think of, which I don't think provides all that you are asking for, though might be enough, is to use "pvchange -t" to change the i/o timeout value. Thu, 27 Nov 2003 04:55:54 GMT Mark Grant 2003-11-27T04:55:54Z https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130061#M152840 Is it possible configure the SCSI timeout if I put off the disk then the os would detect disk be removed,and generate such as,<BR /> <BR /> SCSI Timeout or<BR /> SCSI power faild or<BR /> SCSI reset Thu, 27 Nov 2003 04:32:45 GMT https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130061#M152840 j773303 2003-11-27T04:32:45Z https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130062#M152841 The closest thing I can think of, which I don't think provides all that you are asking for, though might be enough, is to use "pvchange -t" to change the i/o timeout value. Thu, 27 Nov 2003 04:55:54 GMT https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130062#M152841 Mark Grant 2003-11-27T04:55:54Z https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130063#M152842 Hi,<BR /><BR />pvchange -t <NEW value="" in="" seconds=""> <PV_PATH in="" block="" device="" file=""><BR /><BR />default is 120 seconds, you could change it to 180.<BR />Anyway most of the times messages about SCSI resets,timeouts or power failed indicate hw problems.<BR /><BR />I hope this helps you.<BR /><BR />Best regards,<BR />Ettore</PV_PATH></NEW> Thu, 27 Nov 2003 05:16:26 GMT https://community.hpe.com/t5/operating-system-hp-ux/scsi-timeout/m-p/3130063#M152842 Fabio Ettore 2003-11-27T05:16:26Z