topic Re: Creating mirror disk---- IPF server in Operating System - HP-UX

Creating mirror disk---- IPF server

Rgomes — Mon, 01 Dec 2003 07:34:27 GMT

Hi All,

How can I mirror the root vg on rx5670 server. It has little bit different procedure than PA-RISC servers. What I can't understand
the first step:

# vi /tmp/partitionfile
2
EFI 100MB
HPUX 100%

What are these 3 entries?

Thanks all of you,
Richard

Re: Creating mirror disk---- IPF server

Robert-Jan Goossens — Mon, 01 Dec 2003 07:37:28 GMT

Hi Richard,

Here is a good doc from the database,

http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000069099171

Document description: LVM: Mirroring LVM Root Disk On Itanium Systems
Document id: KBRC00011156

Regards,
Robert-Jan

Re: Creating mirror disk---- IPF server

Rgomes — Mon, 01 Dec 2003 07:45:22 GMT

Hi Robert,

Thanks for your prompt reply and the link!
I can still see these 3 lines as the first step:

# vi /tmp/partitionfile
2 <------------ ??
EFI 100MB <---EFI filesystem 100MB,is it ??
HPUX 100% <--- ??

You know what are these? Can you pls let me know.

Thanks again,

Richard

Re: Creating mirror disk---- IPF server

Bernhard Mueller — Mon, 01 Dec 2003 07:46:25 GMT

Richard,

lines of the partitionfile:
# of partitions to create
TYPE_of_partition SIZE_IN_MB
TYPE_of_partition PERCENTAGE_OF_REMAINING_MBs
....

e.g. could look like
8
EFI 500MB
HPUX 1024MB
HPUX 1024MB
HPUX 1024MB
HPUX 1024MB
HPUX 1024MB
HPUX 1024MB
HPUX 1024MB

would create slices 2 to 8 each 1GB in size and after running idisk and insf the command
diskinfo /dev/rdsk/cXtYd0s5 would tell you that it is a disk of 1024MB in size.

Regards,
Bernhard

Re: Creating mirror disk---- IPF server

Bernhard Mueller — Mon, 01 Dec 2003 07:58:18 GMT

Richard,

also with 11.23 the boot disk usually has a third "service" partition:
3
EFI 500MB
HPUX 100%
HPSP 400MB

check current boot disk and run diskinfo on the slices to align the partitioning of the mirrror disk.

Regards
Bernhard

Re: Creating mirror disk---- IPF server

Rgomes — Mon, 01 Dec 2003 07:58:21 GMT

Hi Mueller/Robert-Jan,

Thanks.

I am going to try this tomorrow, may be I'll need help from you.

Best regards
Richard

Re: Creating mirror disk---- IPF server

Rgomes — Tue, 02 Dec 2003 07:01:58 GMT

Hi,

Can you pls chec the idisk info, this is my primary boot HDD, and I need to mirror this with another one. From this idisk info, what whould be me /tmp/partionfile?

Thanks in advance,
Richard

Re: Creating mirror disk---- IPF server

Bernhard Mueller — Tue, 02 Dec 2003 07:16:32 GMT

Richard,

should be like in my second post.

Regards,
Bernhard

Re: Creating mirror disk---- IPF server

Robert-Jan Goossens — Tue, 02 Dec 2003 07:19:38 GMT

Hi Richard,

What part did you go true in the doc.

http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000070348531

Regards,
Robert-Jan

Re: Creating mirror disk---- IPF server

Rgomes — Tue, 02 Dec 2003 07:36:53 GMT

Hi Mueller/Robert,

I am going through the procedure.........

Thanks
Richard

Re: Creating mirror disk---- IPF server

Rgomes — Tue, 02 Dec 2003 08:51:55 GMT

Hi Mueller-Robert,

Thanks and lot, it worked out. I can boot from my alternate HDD.

Thanks again,

Richard :)