https://community.hpe.com/t5/operating-system-hp-ux/invalid-system-id/m-p/2466868#M15873 We have a J282 workstation and installed the 64-Bit Version of HP-UX 11.0. When trying to compile C code with the ANSI C compiler I get an error message from the loader:<BR /><BR />/usr/ccs/bin/ld: <LIB.A>: Not a valid object file (invalid system id)<BR /><BR />How can I circumvent this problem (and install e.g. the gcc suite)?<BR /><BR />Thanks, Sibylle</LIB.A> Thu, 23 Nov 2000 10:12:50 GMT Koestlmeier Sibylle 2000-11-23T10:12:50Z https://community.hpe.com/t5/operating-system-hp-ux/invalid-system-id/m-p/2466868#M15873 We have a J282 workstation and installed the 64-Bit Version of HP-UX 11.0. When trying to compile C code with the ANSI C compiler I get an error message from the loader:<BR /><BR />/usr/ccs/bin/ld: <LIB.A>: Not a valid object file (invalid system id)<BR /><BR />How can I circumvent this problem (and install e.g. the gcc suite)?<BR /><BR />Thanks, Sibylle</LIB.A> Thu, 23 Nov 2000 10:12:50 GMT https://community.hpe.com/t5/operating-system-hp-ux/invalid-system-id/m-p/2466868#M15873 Koestlmeier Sibylle 2000-11-23T10:12:50Z https://community.hpe.com/t5/operating-system-hp-ux/invalid-system-id/m-p/2466869#M15874 Hi Sibylle,<BR /><BR />The following is an excerpt of an old support document that I found:-<BR /><BR />This error is caused by the linker process, /bin/ld, detecting that one<BR />of the object files being used was not produced on the same type of<BR />Hewlett-Packard system as you are using.<BR /><BR />The problem is the library 'lib.a'. Where did it originate? Could you obtain a compatible version?<BR /><BR />Regards,<BR />John<BR /> Thu, 23 Nov 2000 11:05:38 GMT https://community.hpe.com/t5/operating-system-hp-ux/invalid-system-id/m-p/2466869#M15874 John Palmer 2000-11-23T11:05:38Z