topic Re: libdce problem (swremoved DCE-CORE) in Operating System - HP-UX

libdce problem (swremoved DCE-CORE)

Pedro Mansito — Fri, 09 Jan 2004 07:37:39 GMT

Hi!
by error I swremoved the package DCE-CORE from our system (HP-UX 11.00). Now i can't run any sw* command, therefore i can't reinstall DCE-CORE, nor run SAM (and probably many other commands). I copied the libraries from the CD and this is what i get

# swinstall
/usr/lib/dld.sl: Bad magic number for shared library: /usr/lib/libdce.1
/usr/lib/dld.sl: Exec format error
Abort
# sam
/usr/lib/dld.sl: Bad magic number for shared library: /usr/lib/libdce.2
/usr/lib/dld.sl: Exec format error
/usr/sbin/sam[220]: 4832 Abort
# swremove
/usr/lib/dld.sl: Bad magic number for shared library: /usr/lib/libdce.1
/usr/lib/dld.sl: Exec format error
Abort

This is the output of running file on both libraries:

# file /usr/lib/libdce.1
/usr/lib/libdce.1: lex command text
# file /usr/lib/libdce.2
/usr/lib/libdce.2: awk program text

Â¿Should I postprocess the libraries?. If so, Â¿which tool?.

Best regards
Pe

Re: libdce problem (swremoved DCE-CORE)

Pete Randall — Fri, 09 Jan 2004 07:42:13 GMT

Pedro,

Have you got a backup available that you can restore from? That's the only way I can see for you to get out of this situation without re-installing from scratch.

Pete

Re: libdce problem (swremoved DCE-CORE)

Pedro Mansito — Fri, 09 Jan 2004 07:51:23 GMT

Hi Pete, thanks for your reply. Yes, we have a backup, but the backup was made using SAM and SAM also uses DCE:

# sam
/usr/lib/dld.sl: Bad magic number for shared library: /usr/lib/libdce.2
/usr/lib/dld.sl: Exec format error
/usr/sbin/sam[220]: 4832 Abort

Re: libdce problem (swremoved DCE-CORE)

Pete Randall — Fri, 09 Jan 2004 07:55:33 GMT

Pedro,

I believe the SAM backup just uses fbackup, so you should be able to use frecover.

Pete

Re: libdce problem (swremoved DCE-CORE)

Pedro Mansito — Fri, 09 Jan 2004 08:34:47 GMT

Oops, it's not a SAM backup tape but a make_recovery tape. We can't boot the tape because the system has the serial port broken (no console); that's why I tried to copy the files from the CD.

Pedro

Re: libdce problem (swremoved DCE-CORE)

Robert-Jan Goossens — Fri, 09 Jan 2004 08:47:37 GMT

Hi Pedro,

Does the tar command work ?

Load the ignite tape ( read only )

# mt -t /dev/rmt/0mn rew
# mt -t /dev/rmt/0mn fsf 1
# tar tvf /dev/rmt/0mn

Robert-Jan

Re: libdce problem (swremoved DCE-CORE)

Pedro Mansito — Fri, 09 Jan 2004 09:17:01 GMT

Robert-Jan,
tried yor solution but unfortunately the make_recovery tape hasn't got /usr/lib nor /lib.

Pedro