topic Re: n partition in Operating System - HP-UX

n partition

SAM_24 — Thu, 22 Jan 2004 14:48:18 GMT

Hi,

To create N partition on rp7xxx or rp8xxx servers first do I have to install 11i OS?

I didn't get the concept here. I assumed(sorry about that)from GSP I can create partition 1,2,3 etc.. and install the OS. But from the manual I am reading system which is running 11i using parcreate command another partition can be created.

My question on a new system how to create first npartition?

Thanks.

Re: n partition

Sridhar Bhaskarla — Thu, 22 Jan 2004 15:01:56 GMT

Hi,

Yes. You will have to have a base partition called "Genesys" partition before you can create other partitions. Genesys partition is created by the command "cc" in CM menu of GSP. This is a one cell partition with core I/O capabilities with a boot disk and access to install media. Once the OS is installed you can configure other partitions using parmgr command or GUI.

-Sri

Re: n partition

G. Vrijhoeven — Thu, 22 Jan 2004 16:41:38 GMT

Hi,

Here is a link to some documentation that might interest you:

http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/5187-4534/5187-4534_top.html&con=/hpux/onlinedocs/5187-4534/00/00/18-con.html&toc=/hpux/onlinedocs/5187-4534/00/00/18-toc.html&searchterms=npar&queryid=20040122-143932

Gideon