topic Re: getty console console in Operating System - HP-UX

getty console console

j773303 — Sun, 15 Feb 2004 20:32:00 GMT

The "getty console console" not running in the system, so when going to GSP mode, it's can't back to console mode. I try to re-fork "getty console console" daemon, BUT it is would be died after a few minutes. Does anyone has the experience how to fix this problem? Thanks.

Model: L3000
OS: 11.11

Re: getty console console

Michael Tully — Sun, 15 Feb 2004 20:37:15 GMT

Try using another terminal it could be defective.
Also have a look at this posting.
http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=121003

Re: getty console console

Bill Hassell — Sun, 15 Feb 2004 22:17:56 GMT

Did someone change the baud rate in the GSP, or /etc/gettydefs? This is never a good idea since three completely independent settings must all match to provide correct console operation. The terminal should be 9600 baud, 8bits, no parity and the GSP should match. The console entry in /etc/gettydefs must also match. If someone wants a faster terminal, do NOT use the console.

Re: getty console console

Balakumar M — Sun, 15 Feb 2004 22:30:28 GMT

Hi
Have a look at the link,

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=122452

try to restart with "init q"

-Bala