topic Re: Change console device in Operating System - HP-UX

Change console device

Manuel Plaza — Tue, 02 Mar 2004 11:07:24 GMT

Hi all,

We have a rp2470 server with HP-UX 11.11. At boot time only appears boot sequence in a RS-232 console and not in graphics console.
After boot in graphic console appear a message "not in range".
I try to change console type with "setmon" command. When I run this command ask me if I want to do permanent changes and I answer that yes, but when I reboot the system the console selected is the wrong console.

Re: Change console device

Robert-Jan Goossens — Tue, 02 Mar 2004 11:16:57 GMT

Hi Manuel,

Check this doc,

Document description: Graphics setting on rp54xx (L-class) / rp24xx (A-class)
Document id: GRAPHKBRC00003225

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000068882131
US
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000068882131

Regards,
Robert-Jan