topic Re: Customizing installation using Ignite in Operating System - HP-UX

Customizing installation using Ignite

Praveen R — Thu, 04 Mar 2004 08:43:33 GMT

Hi,

Using Ignite i want to fully automate HPUX installation. I want to specify partition information for e.g: for root ("/") i want to specify 3GB and for "/home" 10GB. How do i do automate this in Ignite. Hope i am clear on the requirement.

Regards
Praveen R

Re: Customizing installation using Ignite

Robert Binkhorst — Thu, 04 Mar 2004 08:53:24 GMT

Hi,

You can change these settings in:
/opt/ignite/data/Rel_B.11.11/config

It's explained in detail here:
http://docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90788/B2355-90788_top.html&con=/hpux/onlinedocs/B2355-90788/00/00/16-con.html&toc=/hpux/onlinedocs/B2355-90788/00/00/16-toc.html&searchterms=ignite&queryid=20040304-064829

HTH,

Robert

Re: Customizing installation using Ignite

Sridhar Bhaskarla — Thu, 04 Mar 2004 09:00:19 GMT

Hi Praveen,

It is clearly explained in the Ignite/UX document.

http://docs.hp.com/hpux/onlinedocs/B2355-90829/B2355-90829.html

Look at "Using Configuration Files" section. It is explained there with examples.

-Sri