topic Re: Updating ODE on mirrored boot disk in Operating System - HP-UX

Updating ODE on mirrored boot disk

Ed Hon — Thu, 04 Mar 2004 11:13:25 GMT

After updating the Offline Diagnostics in the LIF area of the primary boot disk, what is the correct mkboot -b command for updating the boot mirror's LIF area (64-bit HP-UX)?

Re: Updating ODE on mirrored boot disk

Ashwani Kashyap — Thu, 04 Mar 2004 11:16:45 GMT

#mkboot -b /usr/sbin/diag/lif/updatediaglif2 -p ISL -p AUTO -p HPUX -p PAD -p LABEL /dev/rdsk/cxtydz

where cxtydz is the device file of your mirrored disk .

Check with lifls /dev/rdsk/cxtydz .

Re: Updating ODE on mirrored boot disk

Steven E. Protter — Thu, 04 Mar 2004 11:16:46 GMT

My complete guide(too much but i'm not sure which part you need).

pvcreate -B /dev/rdsk/c1t0d0 #use real disk

mkboot -l /dev/rdsk/c1t0d0
mkboot -a "hpux -lq (;0)/stand/vmunix" /dev/rdsk/c1t0d0 # use real disk

# mkboot -b /usr/sbin/diag/lif/updatediaglif -p ISL -p AUTO -p HPUX -p PAD -p LABEL /dev/rdsk/c?t?d?

If you are running 64-bit OS:

# mkboot -b /usr/sbin/diag/lif/updatediaglif2 -p ISL -p AUTO -p HPUX -p PAD -p LABEL /dev/rdsk/c?t?d?

vgextend /dev/vg00 /dev/dsk/c1t0d0 # same thing
lvextend -m 1 /dev/vg00/lvol1 /dev/dsk/c1t0d0

# real disk. repeat for other lvols

lvlnboot -r /dev/vg00/lvol3 # root fs /
lvlnboot -s /dev/vg00/lvol2 #swap
lvlnboot -d /dev/vg00/lvol2 #swap/dump
lvlnboot -b /dev/vg00/lvol1
lvlnboot -R
lvlnboot -v
setboot
setboot -a 52.1.0 # second disk

SEP