topic Re: Ultrium 460 and hpux 11.i in Operating System - HP-UX

Ultrium 460 and hpux 11.i

David_550 — Mon, 08 Mar 2004 13:40:32 GMT

Hi,
Somebody can help me with this error message in my hpux 11.i:

Informational: Raw Text
OC_Exception_c caught: I/O Exception (Error: 2123 - I/O: Device is busy and unable to respond)Press any key to continue

The december Gold path was installed and when i acces to my tape (ultrium 460) the message is present.

What is the problem??
Thanks

Re: Ultrium 460 and hpux 11.i

Steven E. Protter — Mon, 08 Mar 2004 13:52:32 GMT

ioscan -fnC tape

Look for a problem NO_HW and such.

Best thing to do is check the hardware is plugged in, etc and scsi is terminated and then restart the system.

if you can't do that, consider insf -e followed by ioscan -fnC tape

Also make sure the tape drive isn't write protected.

SEP

Re: Ultrium 460 and hpux 11.i

David_550 — Mon, 08 Mar 2004 17:38:42 GMT

Hi Steven,
Following is the problem:
I have two tapes ultrium 460,
I need update the firmware of one of my ultrium 460 tape with the hp_ltt program, i update the december 2003 Gold path before.
When i execute ioscan -funC Tape , the tapes are claimed, but when i access to the ultrium 460 with the hp_ltt program for begin the actualization, this software present the following error messages:

OC_Exception_c caught: I/O Exception (Error: 2123 - I/O: Device is busy and unable to respond)

This only happen with one tape.

What is the problem?

Re: Ultrium 460 and hpux 11.i

Kurt Beyers. — Tue, 09 Mar 2004 01:45:57 GMT

Is the tape claimed as well when you perform a 'ioscan -fnC tape'?

best regards,
Kurt

Re: Ultrium 460 and hpux 11.i

Animesh Chakraborty — Tue, 09 Mar 2004 04:22:32 GMT

Hi,
Can you install PHKL_29248 (stape patch)and try?

Thanks
Animesh

Re: Ultrium 460 and hpux 11.i

Shaikh Imran — Tue, 09 Mar 2004 05:23:37 GMT

Hi,
Please try the upgrade of the Firmware through XSTM.
For this you have to either copy the firmware update file to a filesystem and refer the path when asked for.

Regards,