topic Re: patch problem in Operating System - HP-UX

patch problem

yyghp — Mon, 15 Mar 2004 16:40:12 GMT

I am going to install oracle 10g, which requires to have such patch installed first:
PHSS_26793 S700-800 11.X +O4/PBO Compiler B.11.11.04 cumulative patch

But when I tried to load this patch, I couldn't pass the Analysis phase:

The patch fileset "PHSS_26793.LANG-AUX,r=1.0" may only be installed upon a previously installed base fileset. The specification for this base fileset is "Auxiliary-Opt.LANG-AUX,fr=B.11.11.04,v=HP". Since there is no fileset on the target or selected from the source which matches this specification, fileset "PHSS_26793.LANG-AUX,r=1.0" will be excluded.

So, what can i do to load such patch which required for 10g upgrade ?
Thanks!

Re: patch problem

James A. Donovan — Mon, 15 Mar 2004 16:43:26 GMT

Do you have the HP C-ANSI-C product installed? This is where the Auxiliary-Opt.LANG-AUX (/opt/langtools) software comes from. If you don't have it, you'll need to purchase it from HP.

Part #B3901BA

Re: patch problem

Todd McDaniel_1 — Mon, 15 Mar 2004 17:21:05 GMT

Here is the patch info for your patch

http://www1.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PHSS_26793&context=hpux:800:11:00

It appears you need to load this Fileset:

Filesets:
Auxiliary-Opt.LANG-AUX,fr=B.11.11.04,fa=HP-UX_B.11.00_32/64,v=HP

Re: patch problem

Sanjiv Sharma_1 — Mon, 15 Mar 2004 17:54:11 GMT

Hi,

You need to have "C-ANSI-C B.11.11.04" Compiler installed before the patch installation.

hth

Re: patch problem

yyghp — Tue, 16 Mar 2004 08:48:25 GMT

I had installed ansi c compiler before, not B.11.11.04, but B.11.11.06 instead.

# swlist -l product | grep -i ansi
C-ANSI-C B.11.11.06 HP C/ANSI C Compiler

While oracle 10g asks me to load these 2 HP patches before the 10g installation:

PHSS_26792 S700_800 11.X ANSI C Compiler B.11.11.04 cumulative patch
PHSS_26793 S700-800 11.X +O4/PBO Compiler B.11.11.04 cumulative patch

But when I tried to load them, got the same results: analysis failed, cannot install

here's the message for PHSS_26792
NOTE: The patch fileset "PHSS_26792.C,r=1.0" may only be installed
upon a previously installed base fileset. The specification
for this base fileset is "C-ANSI-C.C,fr=B.11.11.04,v=HP".
Since there is no fileset on the target or selected from the
source which matches this specification, fileset
"PHSS_26792.C,r=1.0" will be excluded.
* Executing preDSA command.

* Summary of Analysis Phase:
* 1 of 1 filesets will be Skipped.
* The Analysis Phase succeeded.

So, does it means i don't need to load these 2 patches ?

Re: patch problem

Patrick Wallek — Tue, 16 Mar 2004 09:07:33 GMT

Correct! Those 2 patches are only for B.11.11.04 of the Ansi C compiler. Since you have B.11.11.06 installed you don't need those patches.

However, you probably should install patch PHSS_28706 which is the "ANSI C compiler B.11.11.06 cumulative patch"

You can have a look at the patch here:

http://www1.itrc.hp.com/service/patch/patchDetail.do?BC=patch.breadcrumb.main|patch.breadcrumb.search|&patchid=PHSS_28706&context=hpux:800:11:11

Re: patch problem

Alzhy — Tue, 16 Mar 2004 09:11:05 GMT

Hmm.. I find it hard to believe that to install Oracle 10g, one has to purchase HP's C compiler??

Re: patch problem

Trond Haugen — Tue, 16 Mar 2004 09:25:56 GMT

1. You can't patch something that isn't installed
2. Several years ago you HAD to have a compiler in order to install Oracle. I belive nowadays you only need it if you do "advanced things" with Oracle. (I'm on thin ice here.)

Regards,
Trond