topic Re: HP-UX 10.20 and JetAdmin Print Server in Operating System - HP-UX

HP-UX 10.20 and JetAdmin Print Server

Amit Dixit_2 — Fri, 26 Mar 2004 04:10:46 GMT

HI,
I want to install HP-JetAdmin print server
on my hp-ux, the printer IP address is
192.168.1.200, when i try to install and
configure it using HP-Jetadmin, after
configuring and when i press 'q', it says
do you want to quit without configuring
queue ?

and if i say yes then no printer is added.

tell me how to install printer using
jetadmin

Thanks,
Amit.

Re: HP-UX 10.20 and JetAdmin Print Server

G. Vrijhoeven — Fri, 26 Mar 2004 04:12:27 GMT

Hi Amit,

press 0

HTH,

Gideon

Re: HP-UX 10.20 and JetAdmin Print Server

G. Vrijhoeven — Fri, 26 Mar 2004 04:17:58 GMT

Hi Amit,

Sorry for the short answer. After config. press 0 to configure, the system will ask if the scheduler can be stopped to add the queue and answer yes. Now your printer will be configured.

HTH,

Gideon

Re: HP-UX 10.20 and JetAdmin Print Server

Sanjiv Sharma_1 — Fri, 26 Mar 2004 04:43:54 GMT

Hi Amit,

You need to press "0"

Please check this link:
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?locale=en_US&taskId=115&prodSeriesId=27350&prodTypeId=18972&supportTaskId=2762

Re: HP-UX 10.20 and JetAdmin Print Server

Amit Dixit_2 — Fri, 26 Mar 2004 05:07:27 GMT

Hi,
I did that but after that when i gave the
print command its in queue not getting
printed.

I did'nt configured BOOTP or TFTP but
using 3 option of jetadmin, (.i.e. to
local spooler)

Apart from this can u please tell me
why my parallel port is not getting
detected by SAM though it is listed under
IOSCAN.

i can even configure the printer on
parallel port as well but how to make SAM
to see parallel port.

THanks,
Amit

Re: HP-UX 10.20 and JetAdmin Print Server

piotr wienckiewicz — Fri, 26 Mar 2004 05:29:17 GMT

hi

you must use 1 option in the jetadmin and add your printserver and after add you printer using 3 option. Your printserver's addres must be in /etc/hosts

Re: HP-UX 10.20 and JetAdmin Print Server

Amit Dixit_2 — Fri, 26 Mar 2004 06:07:36 GMT

Hi,
Sorry to bother again.
I dont know what i did but it is showing
a printer in the list by the name plotter
and location /dev/null

after that i again tried to install new
printer, i got added into system
but all of my request are still going to
the one by name plotter.

and i am not getting any output on the
printer.

I deleted all the printers but when i try
to delete "plotter" it says it does not
exist but it is still in the list.

tell me how to delete this printer.

THanks,
Amit.

Re: HP-UX 10.20 and JetAdmin Print Server

Steve Steel — Fri, 26 Mar 2004 08:06:04 GMT

Hi

lpadmin -xprintername

Steve Steel

Re: HP-UX 10.20 and JetAdmin Print Server

Amit Dixit_2 — Sat, 27 Mar 2004 00:36:34 GMT

Hi,
I have given the command
lpadmin -xplotter
but it says noexistent printer.

I deleted all the files from the system
manually but still when i try to add
printer, I am able to add it but again
it is getting attached to /dev/null.

The one to which plotter was attached.
Is there any way to clean the entire
entries from the system.

Even when i give print and check it thru
lpstat -t
it says:
plotter noexistent
disable
reason unknown.
and for the new printer which i add
lpstat -t output is:
hp750c attached to : /dev/null

Please tell me how should i resolve

Also, if some one knows how to configure
printer on serial/parallel port on
HP-UX 10.20 running on Visualize C3000.

Thanks,
Amit.

Re: HP-UX 10.20 and JetAdmin Print Server

KapilRaj — Sat, 27 Mar 2004 04:21:39 GMT

scan /etc/lp/ directory and remove anything for that printer

kaps

Re: HP-UX 10.20 and JetAdmin Print Server

Amit Dixit_2 — Sat, 27 Mar 2004 04:31:02 GMT

Hi Kapil,
Checked the /etc/lp folder

It contains few folder but all of them
are empty.

When i see the SAM it says no printer
installed on the system.

But when i give lpstat -t on command
prompt
it displays :
scheduler is running
no system default destination.
printer plotter is disabled since march 26
fence 0
priority 0

Why it is saying plotter is disabled when
it does not exists.

Please help me.

Thanks,
Amit

Re: HP-UX 10.20 and JetAdmin Print Server

KapilRaj — Sat, 27 Mar 2004 06:43:25 GMT

is there any file called , plotter in /etc/lp/member(s) ?

I think it needs to be removed !

Kaps