topic Re: mirror problem in Operating System - HP-UX

mirror problem

Asif_8 — Tue, 20 Apr 2004 09:07:36 GMT

Hi !

I have HP-UX11i I try make mirror I done

pvcreate -Bf /dev/rdsk/c2t2d0
# mkboot -l /dev/rdsk/c2t2d0 # mkboot -a "hpux -lq (;0)/stand/vmunix" /dev/rdsk/c2t2d0
# vgextend /dev/vg00 /dev/dsk/c2t2d0
After this command I run Lvextend command
lvextend -m 1 /dev/vg00/lvol8 /dev/dsk/c2t2d0
i get error "m" Illegal option

How to check mirror software is install if not how to install and where i get this

Re: mirror problem

Mark Grant — Tue, 20 Apr 2004 09:11:38 GMT

Do you not have the Mirror/UX product? If not, you need to buy it.

Re: mirror problem

A. Clay Stephenson — Tue, 20 Apr 2004 09:12:27 GMT

Do a 'swlist | grep "Mirror"'. If not found then MirrorUX is not installed. It must then be purchased; contact your HP sales rep.

Re: mirror problem

A. Clay Stephenson — Tue, 20 Apr 2004 09:12:28 GMT

Do a 'swlist | grep "Mirror"'. If not found then MirrorUX is not installed. It must then be purchased; contact ypur HP sales rep.

Re: mirror problem

RAC_1 — Tue, 20 Apr 2004 09:14:34 GMT

Do you have hp-ux mirror software installed?

Check. swlist|grep -i mirror
If not, you can create static copy of root disk.

Anil

Re: mirror problem

KapilRaj — Tue, 20 Apr 2004 09:39:19 GMT

You do not have Mirror unix installed

Kaps

Note : -

Re: mirror problem

Asif_8 — Tue, 20 Apr 2004 09:46:18 GMT

Thanks every one ! before reinstall the Os I have mirroing in this server.
1. If i install the mirror-Ux later . can i Run vgreduced to spreate the my disk c2t0d0
because I done following command

mkboot -l /dev/rdsk/c2t2d0 # mkboot -a "hpux -lq (;0)/stand/vmunix" /dev/rdsk/c2t2d0
# vgextend /dev/vg00 /dev/dsk/c2t2d0

asif

Re: mirror problem

Steven E. Protter — Tue, 20 Apr 2004 09:48:28 GMT

swlist -l product | grep -i mirror

Mirror/UX is an add in pay for product. No codeword, it does not work.

vxvm lets you mirror the root vg without additional licsensing.

SEP

Re: mirror problem

Juergen Tappe — Tue, 20 Apr 2004 09:57:07 GMT

You dont need to undo these commands,

just install the mirror software and then
you can continue with the lvextend -m 1 commands.