topic Re: error getting while installing patch. in Operating System - HP-UX

error getting while installing patch.

varian_1 — Tue, 27 Apr 2004 00:25:29 GMT

Hi,

I am getting following error while installing patch on my HP-UX 11.0 server.

moon>/usr/sbin/mk_kernel
Compiling /stand/build/conf.c...
Loading the kernel...
ld: Unsatisfied symbol "mlock_valid_args" in file /usr/conf/lib/libhp-ux.a[vm_cl
ic.o]
ld: Unsatisfied symbol "pwrite" in file /usr/conf/lib/libhp-ux.a[scall_stubs.o]
ld: Unsatisfied symbol "pread" in file /usr/conf/lib/libhp-ux.a[scall_stubs.o]
3 errors.
*** Error exit code 1

Stop.
config: make did an exit(1)

Thanks & Regards

Walter Crasto

Re: error getting while installing patch.

Steven E. Protter — Tue, 27 Apr 2004 00:29:27 GMT

You have possible problems with your system file in /stand

You may need to restore the /stand filesystem.

Make sure there is enough space in it to build a new kernel.

SEP

Re: error getting while installing patch.

varian_1 — Tue, 27 Apr 2004 01:21:04 GMT

Hi,
Thanks for your reply ....

My vmunix & system files in /stand are as below, Please let me know how to use those files. I don't have any backup files for /stand.

/stand has enough space.

# ls -la vm*
-rwxr-xr-x 1 root sys 12965936 Apr 5 13:52 vmunix
-rwxr-xr-x 1 root sys 12965936 Apr 26 19:16 vmunix.org

# ls -la sys*
-r--r--r-- 1 root sys 1384 Apr 5 19:41 system
-r--r--r-- 1 root sys 1388 Apr 27 10:10 system.org
-r--r--r-- 1 root sys 1384 Apr 5 19:41 system.prev

Regards

Walter

Re: error getting while installing patch.

Bharat Katkar — Tue, 27 Apr 2004 01:59:46 GMT

Hi,
Try renaming your existig System file with other name and restore .org file back as system and then see if it works:
# mv system system.crasto
# mv system.org system

if this work then there is something wrong in your system.crasto, edit it and try to locate the problem.

Repeat the procedure again for your system.crasto

Re: error getting while installing patch.

Robert-Jan Goossens — Tue, 27 Apr 2004 02:07:53 GMT

Hi Walter,

Check this doc.

ld: Unsatisfied symbol "mlock_valid_args";lock_claim;lock_disown DocId: KBRC00012218

Europe
http://www4.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000072570328

US
http://www1.itrc.hp.com/service/cki/docDisplay.do?docLocale=en_US&docId=200000072570328

HTH,
Robert-Jan

Re: error getting while installing patch.

varian_1 — Tue, 27 Apr 2004 23:42:55 GMT

Hi All,

Thanks for your reply .....

I tried replacing system file with system.org file & also tried to install following two patches
1)PHKL_28180
2)PHKL_18543

3) PHKL_21850 -> This patch I am not able to find on HP site.

But still I am geting same error while building kernel & patch installation gets suspended.

Thanks & Regards
Walter Crasto

Re: error getting while installing patch.

Daxa Patel — Wed, 28 Apr 2004 04:25:35 GMT

Hi,

Sounds like the issue may be due a reinstall of PHKL_18543 which is the "Line In The Sand" LITS patch .

See ITRC doc :
KBRC00006788: unsatisified symbols: pread pwrite mlock_valid_args
KBRC00006852 : How to recover after a force install of the LITS patch 10.X/11.X

Ensure you have the latest check_patches utility delivered via patch PHCO_27779 before running check_patches ..

Try and determine whether PHKL_18543 has been reinstalled by reviewing the /var/adm/sw/swagent.log .

Ensure you have a good Ignite recovery tape or make_net_recovery archive at hand should the system be unrecoverable .

Regards,
Daxa

Re: error getting while installing patch.

Robert-Jan Goossens — Wed, 28 Apr 2004 04:45:17 GMT

Hi Walter,

could you give us the steps you preformed, what patches did you install, did you craete a ignite tape before you started ?

Regards,
Robert-Jan